Rotomolded Centrifugal Blower Housing | Fan Scroll with Base


Rotomolded centrifugal blower housing with a flat molded base plate, two mounting holes, round inlet with bosses and front discharge. OEM per drawing.

Category:

Cleaning equipment series

Description

Product Overview

A centrifugal blower scroll has to be held still. This one is rotomolded with a flat base plate across the bottom of the shell and two mounting holes formed in that plate, so the housing bolts straight down onto the machine frame and stands on its own.

The round inlet carries molded screw bosses for the motor plate, the discharge leaves at the front, and a handle molded into the top lets one person set the unit in place.

Base Flange Molded into the Shell

Fastening a round scroll to a flat deck usually means a bracket, a strap or a welded foot. Here the base plate and its two holes are formed with the scroll in one cycle, so this blower scroll housing sits square on the frame and the bolt load goes into the wall of the part rather than into a fixing added afterwards.

Because the holes are molded, their spacing is set by the tool. Every housing in a run lines up with the same frame holes, which is what keeps assembly off the shim tray.

Vertical Mounting, Clear Inlet

Standing the blower upright keeps the round inlet off the floor and out of the dust the machine is there to collect, and it puts the discharge where a duct or grille wants it. The top handle is molded with the wall, so lifting the machine by it does not pull a fastener through the shell.

Where the application calls for metal threads at the mounting face instead of molded holes, the volute housing with brass inserts is the alternative to look at.

Product Specifications

SpecValue
ProductCentrifugal Blower Housing
MaterialLLDPE, per machine drawing
ProcessRotational molding, one-piece seamless shell
MountingFlat base plate with two molded mounting holes
Air pathMolded scroll, round inlet, rectangular discharge
Inlet interfaceRound inlet with molded screw bosses
HandlingMolded carry handle on top
DutyCentrifugal fans and blowers in cleaning and drying equipment

Why Rotational Molding

Scroll, base plate, bolt holes, inlet bosses and handle come out of one cycle. The tool is a casting, so hole spacing, plate width and discharge position follow your frame drawing and can be moved as the machine design develops.

What to Send Us

Send the impeller and motor plate layout, the frame hole pattern and the discharge direction you need. If this replaces an existing housing, send the old part or its drawing. See also our volute housing with brass threaded inserts and the air mover housing for floor drying machines.

FAQ

1. Can the base have more than two mounting holes?

Yes. Hole count, spacing and plate outline are tooled to your frame.

2. Is the base plate flat enough to bolt directly to a frame?

It is molded flat. Send your flatness requirement and we will confirm it against the tooling.

3. Can it be supplied in another color?

Yes. Pigment goes into the resin, and color is chosen per order.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!