5L HDPE UTV Fuel Tank


Trail spare for UTVs, ATVs and small engines, a 5-liter HDPE body with X-ribs, a molded top handle and an angled filler cap; capacity, fittings and color to order.

Category:

Fuel Tanks Series

Description

Product Overview

A five-liter can is often the smallest unit in an aftermarket fuel range, and the one most likely to carry a brand's own name. This body is rotomolded as a single HDPE shell: X-ribs molded into both faces, a top handle sized to be gripped with gloves on, an angled screw filler cap set into the corner, and a vent fitting on the opposite shoulder. A recessed bay at the center of the X holds a horizontal slot that takes a strap or a bracket plate, and the color is pigment through the wall rather than a paint layer sitting on top of it.

Nothing on the body is added after molding. Ribs, handle, cap seat, vent boss and slot bay are all mold geometry, which is why the same shell can be supplied as a plain utility body or fitted out for a specific rack. For how a carried reserve sits alongside a plumbed tank, see off-road fuel tank types and applications.

Who Buys This Body

The buyers for a part this size are not usually riders buying one can. They are businesses putting a fuel accessory into a catalogue, a rental fleet or a dealer program, and what they change is predictable.

BuyerWhat they usually specify
Aftermarket accessory brandsOwn label and color, plus a strap or bracket layout that matches a mounting kit already in their range
Rental and tour operatorsA reserve that is easy to hand out and check back in, with a strap point that survives repeated use
Distributors and dealersA small carried reserve that complements the vehicle-mounted tanks they already stock

What Can Be Customized

Each line below is a drawing-level decision, not a catalogue option. Send the ones that matter and we confirm which are mold geometry and which are secondary operations.

ItemRange
CapacityFixed by the tool. A different capacity is a new mold, not an adjustment to this one.
ColorPigment through the HDPE wall to a supplied sample; no paint layer to chip or fade separately.
Filler and ventCap style, cap angle and vent position set in the mold; moving either after tooling means rework.
Strap and bracketSlot bay position, slot width and any molded boss for a bracket plate.
BrandingMolded-in lettering or a flat pad for a label. Both are settled at drawing stage.
FittingsVent fitting type and position, and whether a second opening is needed.

Before Tooling: Four Checks

Most rework on a part this size comes from four inputs that were never written down. All four belong in the drawing review, not in the first article.

CheckWhy it matters
Mounting envelopeWhere the can sits when carried, and what it is allowed to touch. The strap bay and any boss are placed against this, not against a nominal size.
Strap pathThe line a strap takes from anchor to anchor. If it crosses the cap zone, the cap has to move in the tool.
Cap clearanceWhether a nozzle and a gloved hand can reach the cap in the position it is carried, including under a rack or inside a box.
Fuel and closureGasoline and diesel put different demands on the resin and the cap seal. The fuel type is part of the brief, not an afterthought.

Product Specifications

SpecValue
Product5L HDPE UTV Fuel Tank
MaterialHDPE, pigment through the wall
ProcessRotational molding, one-piece seamless body
Capacity5 liters; other sizes on new tooling
FillingAngled screw filler cap plus vent fitting
HandlingMolded top handle, recessed slot bay for straps
CustomCapacity, fittings, color and slot layout to drawing

Why Rotational Molding

A fuel can is judged by its seams, or by not having any. Rotomolding forms the body, the X-ribs, the handle and the corner cap seat from one continuous HDPE wall, so there is no welded joint to weep and no base seam to split when the can is set down hard. The wall comes out even from shoulder to base, which is what lets a small body take being strapped, bounced and dropped without going out of shape.

OEM Supply

We produce this body for OEM and private-label programs from customer drawings, samples and technical specifications, covering tooling preparation, material processing, rotational molding, secondary operations and quality inspection. Project information is treated as confidential, and private-label programs are not disclosed without authorization. For a capacity-matched pair in the same program, see the 20L UTV spare fuel tank.

FAQ

1. Can the capacity change without new tooling?
No. Capacity is mold geometry, so a 10-liter version would be a separate tool rather than a change to this one. Send the target capacity and the mounting envelope and we quote it as a new part.

2. Can the body carry our brand?
Yes, either as molded-in lettering or as a flat pad for a label. Both are decided at drawing stage, because lettering sits in the tool. Labels applied in the field are a different decision and usually do not survive fuel and wash-down.

3. Can you match a can we already sell?
Send a sample. Slot position, cap style, vent position and rib layout transfer to the drawing, and the first article is compared against the can you sent.

4. What should we send for a quote?
Target capacity, color reference, strap or bracket layout, cap and vent position, the vehicle class it goes on, and the annual volume band. If it replaces an existing part, send that part as well.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!