Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
20L Rotomolded UTV Spare Fuel Tank
Fuel Tanks Series
Description
Product Overview
Twenty liters is the unit between a carried can and a plumbed tank: more than a day-ride reserve, without turning a cargo bed into a fuel store. This body is rotomolded as one HDPE shell with a molded handle across the top, a deep recessed panel on the face that stiffens the wall and gives a strap a square seat, and a ladder of horizontal ribs down the side that takes the knocks of loading and unloading.
Filling runs through a black screw cap set beside the handle, with a white inner seal cap underneath. A diagonal recess at the corner keeps the cap zone clear of the strap path, and the flat back face sits square against a bed floor, a rear rack or a shelf. Color is pigment through the wall, so it survives sun and fuel handling without a paint layer to chip.
Where It Fits in a Range
A brand selling both sizes needs the two to be told apart in one line, not two pages of prose. The 5L body is the entry unit; this one is the longer-range unit. Both are carried rather than plumbed, and both share the same strap-and-recess logic, which is what lets them sit in one catalogue without competing. If the fuel has to be pumped rather than poured, the 30 gallon transfer tank covers that job, and a tank mounted on the machine is a different part again. For where a carried reserve sits relative to a plumbed system, see off-road fuel tank types and applications.
Before Tooling: What to Confirm
A carried body is only as good as the place it is carried. These four inputs decide the mold, and none of them can be judged from a drawing of the can alone.
| Confirm | Why it decides the tool |
|---|---|
| Bed or rack footprint | The flat back is sized against a real surface. Give the surface, not a target size. |
| Height when loaded | Whether a full can still clears a tonneau, a tailgate or a rack cross-bar. |
| Cap access in place | The cap sits beside the handle; a strap that crosses it makes the can unusable when it matters. |
| Fuel and seal | The fuel type sets the resin and the cap seal specification, and the inner seal cap is matched to it. |
What Can Be Customized
| Item | Range |
|---|---|
| Capacity | Fixed by the tool. A different capacity means a new mold. |
| Color | Pigment through the HDPE wall to a supplied sample. |
| Cap and seal | Cap type, seal arrangement and cap position relative to the handle. |
| Strap seat | Recessed panel depth, position and any molded slot for a strap or bracket. |
| Rib layout | Rib pitch and depth on the side wall, within what the tool allows. |
| Branding | Molded-in lettering or a label pad, settled at drawing stage. |
Product Specifications
| Spec | Value |
|---|---|
| Product | 20L UTV Spare Fuel Tank |
| Material | HDPE, pigment through the wall |
| Process | Rotational molding, one-piece seamless body |
| Capacity | 20 liters; other sizes on new tooling |
| Filling | Black screw cap with white inner seal cap |
| Handling | Molded top handle, recessed face panel for straps |
| Custom | Capacity, color, fittings and rib layout to drawing |
Why Rotational Molding
Fuel containers fail at their seams, so the process that leaves no seams has the advantage. Rotomolding forms the body, the handle, the recessed panel and the rib ladder from one continuous HDPE wall: nothing welded, nothing glued, no base joint to split when the can is set down on gravel. The even wall carries the recess and the ribs without thin spots, which is what keeps a 20-liter load stable over corrugated roads and washboard tracks.
OEM Supply
We produce this body for OEM and private-label programs from customer drawings, samples and technical specifications, covering tooling preparation, material processing, rotational molding, secondary operations and quality inspection. Project information is treated as confidential, and private-label programs are not disclosed without authorization. The 5L version shares the same construction for programs that need both sizes.
FAQ
1. How does it strap down in a UTV bed?
The recessed face panel and the flat back give the strap a square seat, and the handle sits outside the strap path. Send the bed or rack drawing and the panel position and fitting positions can be matched to it.
2. Can it be supplied with mounting feet for a permanent install?
Not on this body. A carried reserve has no integral feet or sender opening, so a permanent installation is a different part with molded mounting points and a vented cap. Send the frame or bed drawing and we quote that separately.
3. Is there a smaller or larger version?
The 5L body covers the short reserve and is already in production. A larger capacity would be a new tool rather than a change to this one.
4. What should we send for a quote?
Capacity, color reference, strap or bracket layout, cap position, the machine class it goes on, and the annual volume band. If it replaces a can already in use, send that can as well.
Previous
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!