Rotomolded Trough Planter with Wood-Grain Texture


Rectangular rotomolded trough planter,790× 305 ×250mm, with a wood-grain texture formed in the mold. One-piece UV-stabilized LLDPE in gray. Built to drawing, new mold required. Samples after tooling, MOQ 100 pieces per size and color.

Category:

Indoor & Outdoor Furniture

Regular Outdoor Furniture

Description

Product Overview

This rectangular trough planter is rotational molded as a single piece, with a wood-grain texture molded into the outer surface. The grain comes from the mold itself, not from a laminate or coating, so there is no layer that can lift or flake. The molded top rim stiffens the long walls and gives the pot a finished edge from every viewing angle.

The body measures 790 mm long, 305 mm wide and 250 mm high, molded in gray with a weathered-wood look. At this length the planter suits balcony edges, walkway planting, restaurant and office divisions, and long counters where round pots leave gaps. It is molded from UV-stabilized LLDPE, and the pigment runs through the wall, so scuffs do not expose a different color underneath. This size is built to drawing, so it needs its own mold. We quote the tooling cost and the unit price separately, send samples once the mold is ready, and the minimum order quantity is 100 pieces per size and color.

Product Specifications

ProcessRotational molding, one-piece body
MaterialLLDPE, UV-stabilized grade
Size790 mm length × 305 mm width × 250 mm height
SurfaceWood-grain texture formed in the mold
Standard colorGray, weathered-wood look; other colors molded to request
RimMolded top rim for stiffness and edge finish
Wall thicknessSet to the mold spec; confirm at enquiry stage
Drainage holesNot drilled by default; can be molded in or drilled to your pattern
Tooling for this sizeNew mold required, built to drawing
SampleAvailable once the mold is built
Minimum order quantity100 pieces per size and color
Other sizesMade to drawing

Custom Rotomolding

This trough is built to your drawing, so tooling is part of the first order, and we quote the mold cost and the unit price separately so you can see what each part covers. Once the mold exists, later runs can use a different color for a seasonal range, since pigment goes into the PE before molding. The mold can be built for a shorter or longer trough, a two-section layout, matching end caps, or a company logo formed into the side wall. Dimensions can be checked against a RAL color code or a physical sample before production. Send the length, color and quantity per size, and we will confirm a workable specification and the tooling cost with you.

Why Rotational Molding

A long trough is a demanding shape for plastics: the flat side walls need even wall thickness or they warp. In rotational molding the powder coats the whole mold surface as it turns, so the walls, corners and rim come out at a consistent thickness from one seamless part. There are no glued joints and no weld lines to open up later. Unlike a wooden trough, the PE body does not rot, and unlike a steel one it does not rust where the coating is scratched. The hollow wall also keeps the weight down, which makes a 790 mm planter manageable for one person to position on site. For long runs of identical planters, the mold repeats the same shape every cycle.

FAQ

Is this trough made of wood?
No. It is polyethylene with a wood-grain texture molded into the surface. The grain is part of the mold, so it stays when the pot is handled, washed or left outdoors.

Where is this size usually used?
The 790 mm length is often chosen for balcony edges, counter and walkway planting, and as a divider in restaurants and offices. The final placement depends on your project, so tell us the setting when you enquire.

Can it stay outside all year?
The material is a UV-stabilized grade and the wall does not absorb water. As with any outdoor plastic, the surface weather slowly over the years, so it is worth telling us the intended location when you request a quotation.

What is the minimum order quantity?
100 pieces per size and color. If your first order needs several colors of this trough, tell us the split and we will confirm pricing for the mixed quantity.

Do I need to pay for tooling?
Yes for this size. The trough is built to your drawing and needs its own mold, so the tooling is quoted separately from the unit price, and the mold stays ours for your repeat orders.

Can I see a sample first?
Yes. Samples are produced once the mold is built, so you can check the wall thickness, the wood-grain finish and the color before the production run starts.

Can you make it in a different length?
Yes. Other lengths and shapes are made to drawing, each with its own mold, and we quote the tooling separately from the unit price.

Other garden pots in the range include the LED illuminated flower pot and the round stone-effect planter series on our custom rotomolding page, which also explains how an OEM project is quoted. Company background and molding capacity are on the about page.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!