Rotomolded Stone-Effect Planter (3 Sizes-existing molds)


One-piece rotomolded planter with a stone-effect texture formed in the mold, available in Ø300, Ø430 and Ø450 sizes. UV-stabilized LLDPE body, terracotta or custom colors, no tooling cost on existing sizes, samples available, MOQ 100 pieces per size and color.

Category:

Indoor & Outdoor Furniture

Description

Product Overview

This terracotta-color planter is rotational molded in one piece, with the stone-effect texture formed directly in the mold surface. The texture is part of the wall itself, so it does not peel or scratch off the way a printed or coated finish can. The tapered round body is tooled in three sizes: 300 × 300mm, 430 ×360mm and 450 ×525mm, which cover table-top retail pots through to floor planters for entrances and landscaping schemes.

The body is molded from UV-stabilized LLDPE. Pigment is mixed into the raw material before molding, so the color runs through the full wall thickness. The pot is much lighter than a same-size ceramic or concrete planter, which matters when pallets are moved in and out of a garden center or up to a rooftop project. The three sizes listed here run from existing molds, so there is no tooling cost for them. Samples can be sent for your evaluation, and the minimum order quantity is 100 pieces per size and color. If the terracotta look is not what your range needs, the same molds can run in other colors.

 

Product Specifications

ProcessRotational molding, one-piece seamless body
MaterialLLDPE, UV-stabilized grade
Size 1300mm top diameter ×300mm height
Size 2430mm top diameter ×360mm height
Size 3 450mm top diameter ×525mm height
SurfaceStone-effect texture formed in the mold
Standard colorTerracotta; other colors molded to request
Wall thicknessSet by pot size; confirm at enquiry stage
Drainage holesNot drilled by default; can be molded in or drilled to your pattern
Tooling for listed sizesExisting molds, no new tooling required
SampleAvailable on request
Minimum order quantity100 pieces per size and color
Other sizesMade to drawing

 

Custom Rotomolding

Because the three sizes above already have molds, a first order does not carry tooling cost, which lowers the barrier for testing a new planter range or a seasonal color. The planter is a good example of what rotational molding does well with garden products: the outer texture, the rim detail and the color are all decided at the mold and material stage. If your range needs a different diameter, a taller body, a matched saucer, or a logo molded into the side wall, that means a new mold, and we quote the tooling and unit price from your drawing. Color matching against a RAL code or a physical sample is available. Tell us the sizes, colors and quantities per size you have in mind, and we will come back with a workable specification rather than a guess.

 

Why Rotational Molding

A rotationally molded planter starts as polyethylene powder in a hollow mold. The mold rotates in an oven, the powder melts and coats the wall evenly, and the part cools into a single seamless body. There are no weld lines and no joints, so there is no seam to split along. The PE wall does not absorb water, which helps the pot cope with outdoor winter storage. The hollow structure keeps the weight low for freight and shelf handling, while the material itself resists the knocks that crack ceramic pots in a busy retail aisle. For a garden range that ships in containers and gets handled daily, these points are usually what decides the material choice.

 

FAQ

What is the minimum order quantity?
100 pieces per size and color. If your first order covers several sizes, tell us the split and we will confirm pricing for the mixed quantity.

Can I order a sample before placing the full order?
Yes. Samples of the existing sizes are available, so you can check the wall thickness, the stone-effect texture and the color before committing to a production run.

Do I have to pay for tooling?
Not for the three sizes listed here. They run from molds we already have. A size or shape that does not exist yet needs a new mold, and we quote that cost separately from the unit price.

Are the pots made in stock, or to order?
The three sizes run from existing molds and are produced to order. Tell us the size and quantity and we will confirm the current production plan with you.

Can I get this planter in my own color?
Yes. Pigment is mixed into the PE before molding, so custom colors are practical at the minimum order quantity. Send a RAL code or a color sample to match.

Do the pots have drainage holes?
Not by default. Holes can be formed in the mold or drilled afterwards to your pattern; tell us which you prefer at enquiry stage.

Will the color fade outdoors?
The material is a UV-stabilized grade and the color runs through the wall. Like all outdoor plastics, surface appearance changes slowly over years of sun exposure, so we suggest discussing the intended installation with us when you enquire.

Sizes in the same large-planter range and other garden products are listed under the LED illuminated flower pot series, and the custom rotomolding page explains how an OEM project is quoted. Company background and molding capacity are on the about page.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!