Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
30 Gallon Rotomolded Fuel Transfer Tank with Pump Alcove
Fuel Tanks Series
Description
Product Overview
A transfer tank that rides in a truck bed lives a hard life. The pump gets kicked, the hose gets stood on, and the fittings work loose on washboard roads. Most tanks answer with a bolted-on toolbox; this one molds the protection into the body.
This is a 30-gallon fuel transfer tank rotomolded from LLDPE as a single seamless piece, designed for mobile fuel delivery on trucks, fleets and farm equipment. The large open alcove set into the body is the working bay: the pump, delivery hose and nozzle mount inside it and travel below the rim, shielded from impact, weather and theft by the walls around them.
For a version supplied complete with pump and hose on a closed body, see the diesel transfer tank with pump; this body is the open-bay format for fitting your own gear.
How the Alcove Works
The alcove is molded into the top of the body in the same cycle as the shell. Its floor carries the mounting surface for the pump, and its depth keeps the hose coil and nozzle below the tank's outer rim, so nothing rides proud of the tank to be knocked or grabbed. The slopes around the bay are molded, not welded, so the load paths stay continuous through every wall.
The raised corner column carries the threaded filler boss at the highest point of the molding, and a brass insert is molded into the front face for the vent or outlet fitting — a metal thread locked into the wall at molding rather than driven into plastic afterwards.
Mounting and Handling
The stepped side faces form flat mounting zones with molded holes, so the tank bolts directly to a truck bed, trailer deck or skid. The steps also read as grip lines when the tank is handled by hand at the weights this body works at. Mounting hole positions are set from your drawing.
Product Specifications
| Spec | Value |
|---|---|
| Product | 30 Gallon Rotomolded Fuel Transfer Tank |
| Material | LLDPE, UV-stabilized |
| Process | Rotational molding, one-piece seamless body |
| Capacity | 30 gallons (≈115 L) as shown, set by the drawing |
| Alcove | Molded-in open bay for pump, hose and nozzle |
| Filler | Threaded boss on the raised corner column |
| Fittings | Brass insert molded into the front face; further bosses per drawing |
| Mounting | Stepped side faces with molded holes, per drawing |
| Media | Diesel or gasoline, compound selected at quotation |
| Application | Truck beds, fleets, farms and mobile fuel delivery |
Why Rotational Molding
A steel transfer tank carries its pump in a bolted-on toolbox that rusts at the seams and rattles loose. Rotomolding forms the alcove, the corner column and the brass insert in the same seamless cycle, so the protection is part of the wall and the tank does not corrode from the outside in. Wall thickness is set by the powder charge and comes out uniform through every slope of the bay.
What to Send Us
Send the pump and hose specification you mount in the alcove, the capacity, the media, the fixing layout of the bed or skid, and the port list. If you are replacing a steel tank, send that as well and we will match the mounting points.
FAQ
1. Can we fit our own pump and hose kit?
Yes, that is the intent of the open bay. Send the pump base dimensions and we will set the mounting face and the fitting positions from it.
2. Is the tank suitable for gasoline?
Yes, with the compound and seals selected for gasoline at quotation. Tell us the media before production.
3. Can the alcove take a lockable cover?
Yes. Tell us at quotation whether the bay is open or covered, and the geometry and fixings are built for it.
4. Can the capacity change from 30 gallons?
Yes. Capacity is set by the drawing; the format stays the same. Tell us the target and we will confirm the envelope.
Keywords:
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!