Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Textured Rotomolded Fuel Tank for Off-Road Machines
Fuel Tanks Series
Description
Product Overview
Small off-road machines ask more of a fuel tank than their size suggests. The tank sits between the rider's knees or under the seat, it takes branches, boots and rollovers, and it has no room for a welded seam to crack along.
This tank is rotomolded from polyethylene as a single angular body. The filler neck on the shoulder is molded with a full thread, a large opening on the top face takes the sender or the draw assembly, and the side face carries a molded texture of diagonal ribs that stiffens the panel and gives the surface its grip pattern. There is no seam anywhere on the body.
For a smaller triangular body with a front mounting lug, see the triangle tank for ATVs; for a ribbed machinery body, the ribbed machinery tank.
The Textured Face
The diagonal rib pattern is formed in the mold surface, so it comes out of the tool the same on every cycle. It does three jobs: it stiffens the wide side panel, it hides the scuffs that a gloss surface would show, and it keeps the tank from reading as an added box on the machine.
The round boss molded into the ribbed face takes a fitting or a fastener where the machine needs one. Where the layout needs a smoother flank, the texture runs on one face only — the mold is built that way from your drawing.
Openings and Mounting
The threaded filler neck and the large top opening are both molded with reinforced seats, so caps and flanges seal against real wall thickness. Mounting points sit along the base rails per your frame drawing, and outlet and vent ports are placed to match the engine layout.
Product Specifications
| Spec | Value |
|---|---|
| Product | Textured Rotomolded Fuel Tank for Off-Road Machines |
| Material | LLDPE or HDPE |
| Process | Rotational molding, one-piece body |
| Surface | Molded diagonal rib texture on the flank |
| Filler | Molded threaded neck on the shoulder |
| Ports | Large top opening for sender or draw; outlet and vent per drawing |
| Mounting | Base rail points per frame drawing |
| Application | ATV, quad and compact off-road machines |
Why Rotational Molding
This class of tank used to be welded steel or blow-molded. Rotomolding takes the middle ground: tooling far cheaper than a steel stamping line, a seamless wall instead of a welded seam, and a texture that forms in the mold rather than being applied. The threaded neck and the large opening both come out of the same cycle with their sealing faces intact.
What to Send Us
Send the frame drawing with the space available, the capacity, the cap specification and the sender flange pattern. A photo of the machine with the old tank removed is often enough to start.
FAQ
1. Can the texture be changed?
Yes. The pattern is part of the mold surface, so rib direction, depth and coverage are set at tooling. Send a sample of the texture you want.
2. Does the tank resist fuel with ethanol?
The material grade is selected for the fuel blend you run. Tell us the ethanol content and we will confirm the compound.
3. Can the tank copy an existing plastic tank?
Yes. Send the sample part and we work back from it, adjusting ribs and wall where the original failed.
Keywords:
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!