Rotomolded Air Mover Housing


Rotomolded air mover housing with one-piece molded scroll, inlet flange with screw bosses, front rectangular discharge and molded handle. OEM per drawing.

Category:

Cleaning equipment series

Description

Product Overview

An air mover is judged by how much of the impeller's work reaches the floor. This housing is rotomolded as a single red shell, with the scroll wall, the round inlet and the rectangular discharge all formed in one cycle and no fabricated joint lying across the air path.

The inlet is a raised circular flange ring carrying molded screw bosses, so the motor plate or inlet grille bolts straight onto the molding. The discharge opens low at the front to send air along the floor, and the molded top handle gives the operator a grip.

One-Piece Scroll, No Seam in the Air Path

The scroll is the passage that turns impeller speed into usable flow, and it does that only if its section expands smoothly from the cut-off round to the throat. Rotomolding forms the whole passage at once, so the curve follows the impeller drawing rather than the limits of a bent and welded sheet.

A molded shell also keeps the corners open, with no lap joint to work loose in service.

Inlet Flange and Service Handling

The flange ring is molded flat and carries its own screw bosses, which holds the motor and grille square to the impeller and gives fasteners solid material to pull against. Because the bosses are part of the wall, they stay put through repeated removal.

The top handle is molded into the same wall instead of being bolted on. For a rental fleet, an air mover shell replacement swaps onto the same footprint without re-drilling.

Product Specifications

SpecValue
ProductAir Mover Housing
MaterialLLDPE, per machine drawing
ProcessRotational molding, one-piece seamless shell
Air pathMolded scroll, round inlet, rectangular front discharge
Inlet interfaceRaised circular flange ring with molded screw bosses
HandlingMolded carry handle on top
ColorPigmented in the resin, per order
DutyAir movers, carpet dryers and floor dryers, OEM machines

Why Rotational Molding

This geometry — expanding scroll, flange ring with bosses, low front discharge, molded handle — is a single rotomolding cycle. Tooling is a cast mold, so the bolt circle, the discharge position and the handle shape follow your air mover drawing and can be revised between production runs.

What to Send Us

Send the impeller and motor plate layout, the inlet bolt circle and the discharge direction you need. If this replaces an existing shell, send the old part or its drawing. See also our carpet dryer housing with a top discharge duct, and the larger floor dryer housing for full-size machines.

FAQ

1. Can the inlet bolt circle match our motor plate?

Yes. Boss positions are mold geometry and are set to your plate drawing.

2. Can the discharge be moved or resized?

Yes. The throat is tooled to your machine, so send the section and the direction you want.

3. Can it be supplied without the handle?

Yes. It can be omitted or reshaped in tooling.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!