Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Rotomolded Carpet Dryer Housing
Cleaning equipment series
Description
Product Overview
A carpet dryer has to put air where the carpet is still wet — under furniture, along a skirting board, across a drying lane. This housing is rotomolded as one blue shell with a discharge duct molded into the top of the scroll, so air leaves upward as well as forward.
The round inlet sits on the face of the scroll, the rectangular outlet opens low at the front, and an arched handle is molded across the top for carrying the machine from room to room.
Top Discharge Duct, Molded In
Warm air rises, and a dryer that only blows forward leaves that warm air sitting at the machine. The upward duct here is part of the same molding rather than a clipped-on elbow: there is no joint to leak and no clamp to work loose on a machine that gets moved by its handle every hour.
With both outlets working, one machine can work on the floor surface and on the air above it at the same time.
Two Outlets, Fixed by the Tool
The top duct and the front rectangular outlet are formed in the same cycle, so their relative position is set by the mold instead of by an assembly jig. That repeatability is what matters on a production line: every carpet dryer blower shell bolts up the same way.
The arched handle is molded with the wall, so it carries the weight of the machine directly instead of through two screws through the shell.
Product Specifications
| Spec | Value |
|---|---|
| Product | Carpet Dryer Housing |
| Material | LLDPE, per machine drawing |
| Process | Rotational molding, one-piece seamless shell |
| Air path | Molded scroll with round inlet on the face |
| Outlets | Top discharge duct and rectangular front outlet, both molded |
| Handling | Arched carry handle molded across the top |
| Color | Pigmented in the resin, per order |
| Duty | Carpet dryers, floor dryers and air movers, OEM machines |
Why Rotational Molding
A scroll with a duct growing out of its back wall is awkward to fabricate and easy to rotomold. The mold is a casting, so the duct angle, its outlet size and the position of the front throat follow your dryer drawing and can be adjusted between runs.
What to Send Us
Send the impeller and motor plate layout, the duct angle and the machine footprint you have to work inside. If this replaces an existing shell, send the old part or its drawing. See also our air mover housing with a single front discharge, and the centrifugal blower housing with a molded base plate.
FAQ
1. Can the top duct angle be changed?
Yes. The duct direction and its outlet size are tooled to your machine layout.
2. Can one outlet be closed off?
Yes. The housing can be tooled with either opening alone if your design uses one discharge.
3. Is the handle molded or added?
Molded with the shell. It can be reshaped or removed in tooling.
Keywords:
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!