Rotomolded Floor Scrubber Body with Molded Handle


Rotomolded floor scrubber body in blue with the pushing handle molded directly into the rear of the shell, side recesses at the flanks, a recessed seat for a separate black top plate, and a separate black base. One-piece main shell, OEM per machine drawing.

Category:

Cleaning equipment series

Description

Product Overview

The body of a walk-behind scrubber carries the tanks, the deck and the drive, and it sets the machine's silhouette. This one is rotomolded as a blue main shell with a black top plate and a black base, and the pushing handle is molded into the rear of the shell rather than bolted to it.

Side recesses break the flanks for hand grips and for whatever the machine mounts there. The blue body runs on a continuous curvature from nose to tail, so there is no flat panel where dirt or rinse water collects.

Handle Molded into the Shell

The rear handle is the same piece of polyethylene as the body — no bracket, no fasteners and no joint to work loose under pushing load. The grip opening forms in the molding cycle, so hand clearance is identical on every part and the shell needs no secondary drilling at the rear.

Top Plate Seat and Separate Base

The top closes with a black plate that drops into a molded seat in the shell, and the base is a separate black part taking the ground-side contact. Both are separate pieces, so the body stays one molding while the wear parts can be specified to your own material and replaced in service.

Product Specifications

SpecValue
ProductFloor Scrubber Body with Molded Handle
MaterialLLDPE, per machine drawing
ProcessRotational molding, one-piece main shell
ColorBlue body with black top plate and base — molded-in color
HandleMolded into the rear of the shell, grip opening formed in cycle
TopRecessed seat for a separate black top plate
BaseSeparate black base part
SidesMolded recesses at the flanks
DutyWalk-behind floor scrubbers, OEM cleaning machines

Why Rotational Molding

A shell that carries its own handle, its side recesses and a plate seat in one piece comes out of a rotomolding cycle with no weld line. Tooling is a cast mold, so the handle opening, the recess positions and the seat depth follow your drawing and can move as the design matures.

What to Send Us

Send the chassis drawing, the handle height and grip clearance you need, and the outline of the top plate and base. If this body replaces an existing shell, send the old part. See also the compact floor scrubber shroud and the two-piece floor scrubber housing.

FAQ

1. Can the handle shape be changed?

Yes. The grip opening is mold geometry, so height, width and hand clearance follow your drawing.

2. Are the top plate and base supplied with the body?

They are separate parts. We mold the body with the seat and can supply the plate and base to your drawing, or ship the shell for your own parts.

3. Can the body be supplied in another color?

Yes, pigment goes into the resin. Blue body with black plate and base is molded-in color, not paint.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!