Rotomolded Floor Scrubber Shroud


Two-piece shell with a round recessed nose opening for a nozzle or fitting and a rear handle slot, the halves joining at one parting line; molded to your drawing.

Category:

Cleaning equipment series

Description

Product Overview

This floor scrubber shroud is the two-piece shell that closes a compact machine: a blue upper cover and a black lower base, molded separately and brought together at the parting line that runs around the body. The upper section carries the machine's visible surfaces, while the black section wraps the deck area where scuffs and wet contact happen during work.

At the nose, a round recessed opening is formed directly into the shell, giving a seat for a nozzle, fitting or cable entry without a cut edge. At the rear, a slot through the body provides a handhold or handle mount. Both are mold geometry, so they sit in the same place on every unit.

Two Colors, Two Pieces

Splitting the shroud into an upper and a lower piece lets each half be molded in its own resin. The blue top takes the pigment and gloss the machine is sold with; the black base takes the knocks near the floor. Service access follows the same split — the upper shroud lifts away from the base instead of the whole shell coming off.

Because the two parts come from matched tooling, the seam line stays where the drawing puts it on every build. Color split, parting position and the recess geometry can all be adjusted while the tool is still a casting.

Product Specifications

SpecValue
ProductFloor Scrubber Shroud, two-piece
MaterialLLDPE, per machine drawing
ProcessRotational molding, one piece per half, no welded seams
ColorBlue upper shroud, black lower base; pigment in resin
Front interfaceRound recessed opening at the nose for nozzle, fitting or cable
HandlingRear slot formed through the shell for handhold or handle mount
AssemblyUpper and lower halves joined at the parting line, bosses per drawing
DutyCompact and walk-behind floor scrubbers, OEM machines

Why Rotational Molding

A shell like this — curved nose, recessed round opening, slot through the rear, continuous parting line — comes out of one cycle per half, with the wall thickness carried around the corners instead of stretched thin. Tooling is a casting rather than a machined block, so the color split and the recess position follow your machine's drawing and can still move while the design settles.

What to Send Us

Send the shroud drawing or the machine outline with the nose opening, the rear handle slot and the parting line marked, plus the color split you want. If this replaces an existing cover, send that part. See also our floor scrubber housing and the compact floor scrubber shell in the same family.

FAQ

1. Can the nose opening be moved or resized?

Yes. It is mold geometry, so position and diameter follow the fitting or nozzle your machine uses.

2. Is the two-tone split fixed?

No — the parting line and each half's color are set by the drawing, and pigment is mixed into the resin.

3. Can the shroud be made as a single piece?

One-piece shells are possible where service access allows; tell us how the machine is opened for maintenance.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!