Rotomolded Floor Scrubber Hood


Molded cover with a top service window and vertical cooling vents in the front face, both formed in one cycle with no secondary cutting; tooled to your machine outline.

Category:

Cleaning equipment series

Description

Product Overview

This floor scrubber hood is the green upper shell that sits over a grey base and closes the top of a walk-behind machine. Its defining feature is the large rectangular opening in the top surface — a service window that reaches straight through to the machine's interior, so routine checks do not start with removing the hood.

The front face carries a row of vertical ribs that read as ventilation slots, letting air move through the machine bay. At the rear the shell extends into a fin, covering and stiffening the back of the body. Green over grey keeps the visible surfaces and the lower wear surfaces as separate moldings.

Service Window and Vents, Molded In

The window and the vent ribs are formed in the same cycle as the rest of the hood. Nothing is routed, drilled or added afterward, so the opening has a finished edge and the vent slots repeat exactly from unit to unit. That removes a set of secondary operations from the build.

Window size, vent spacing and the rear fin profile are all mold geometry. They can be set to the heat load and the service access your machine needs, and revised while the tool is still a casting.

Product Specifications

SpecValue
ProductFloor Scrubber Hood with Service Window
MaterialLLDPE, per machine drawing
ProcessRotational molding, vents and window formed in cycle
ColorGreen hood over grey base; pigment in resin
VentilationVertical molded ribs forming slots on the front face
Service accessLarge molded opening in the top surface reaching the interior
Rear formFin extension at the rear of the shell
DutyWalk-behind floor scrubbers and OEM cleaning machines

Why Rotational Molding

Cutting a window and a vent row into a finished shell means a fixture, a second handling step and a raw edge at every slot. Rotomolding forms the opening, the ribs and the rear fin in one cycle, with the wall carried through each feature. Tooling is a casting, so window position and vent spacing follow your machine's layout and stay adjustable as the design matures.

What to Send Us

Send the hood drawing or the machine top view with the window outline, vent area and rear extension marked, plus the colors for each half. If this replaces an existing hood, send that part. Related: our cleaning equipment housing with a similar vent layout and the two-piece floor scrubber shroud.

FAQ

1. Can the service window take a hinged lid?

Yes — tell us the lid you plan to fit and we form the opening and any boss or seat to suit it.

2. Are the vent ribs structural or cosmetic?

They are molded ribs: they open the airflow path and stiffen the front face at the same time.

3. Can the hood be supplied in one color?

Yes. Pigment goes into the resin, so a single-color hood or a different two-tone split is a drawing decision.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!