Compact Rotomolded Floor Scrubber Shell


Built around a threaded filler neck molded into the cover, with an oval recess in each side and a wrap-around base skirt; tooled to your machine outline.

Category:

Cleaning equipment series

Description

Product Overview

A small scrubber has no room for a panel rack, so its shell has to carry the openings itself. This blue cover does that in one piece: a threaded filler neck rises from the top, an oval recess is formed into each side, and a slot at the rear takes the operator handle. A grey skirt closes the base.

Everything sits tight to the machine footprint. Nothing projects beyond the shell outline, which is what lets the unit work along walls and around fixtures in tight aisles.

The Filler Neck Is Part of the Cover

The neck is not a fitting screwed into a hole. It is molded with the cover in the same cycle, and the internal thread form comes out of the mold with it — no insert pressed in afterwards, no second machining step, and no joint at the base of the neck to weep. The molded cap sits on that thread.

Grip and Clearance Where They Are Needed

The oval recesses give hands a place to lift the machine without adding external handles that catch on door frames. The rear slot leaves the handle to pass cleanly through the shell. Both are shallow, molded forms that keep the outer surface smooth in every other direction.

Product Specifications

SpecValue
ProductCompact Floor Scrubber Shell
MaterialLLDPE, per machine drawing
ProcessRotational molding, cover and skirt molded as separate parts
StructureCompact two-tone shell, wrap-around base skirt
FillerIntegral molded filler neck with internal thread form and cap
InterfaceOval side recesses, rear handle slot
DutyCompact and walk-behind floor scrubbers, OEM cleaning machines

Why Rotational Molding

Rotomolding builds the neck, its thread form, the recesses and the slot in one cycle, and keeps wall thickness even around each of them. A fabricated compact shell would add the neck as a bought-in fitting with a gasket and screws — more parts in a space that has none to spare. Tooling is cast, so neck position and thread form follow your drawing.

What to Send Us

Send the footprint you have to stay inside, the neck thread you use, and where the operator handle enters the shell. If this replaces a damaged unit, send that shell. See also the compact scrubber body and the floor scrubber shroud.

FAQ

1. Is the filler neck likely to leak at its base?

There is no joint at the base to leak through — the neck is the same continuous piece of polyethylene as the cover.

2. Can the neck thread be changed to our cap?

Yes. Send the thread specification and the mold is cut to match the cap you already use.

3. Can this shell be supplied as a replacement part?

Yes. Send the existing part or its drawing and we quote tooling or production from that geometry.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!