Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Rotomolded Floor Scrubber Top Cover
Cleaning equipment series
Description
Product Overview
This two-tone cover closes the top of a walk-behind scrubber while keeping the service side open. The open cavity across the top holds a molded-in mounting plate with a center hole, which is where the machine's controls or pump sit. A lift handle is shaped into the rear, and a molded spout projects from the front.
Curved ribs run down each side, stiffening the walls without adding thickness. The lighter upper shell meets a darker lower skirt along a single horizontal line, so the cover reads as one assembly on the machine.
The Service Parts Are Already Molded In
The point of the open cavity is that equipment lands on a surface the mold made. The mounting plate and its center hole are formed in the same cycle as the cover, so a pump or control box drops onto a flat, repeatable seat. There is no bracket to weld square and no spacer stack to shim level.
The front spout answers the same way. It is molded as part of the wall and can serve as a pour lip or a cable pass-through, whichever the machine needs. Either use comes out of the drawing, not out of a second operation.
Product Specifications
| Spec | Value |
|---|---|
| Product | Floor Scrubber Top Cover |
| Material | LLDPE, per machine drawing |
| Process | Rotational molding, one-piece shell |
| Structure | Open top cavity, curved side ribs, raised rear lip |
| Mounting | Molded mounting plate with center hole, bosses per drawing |
| Interface | Rear lift handle, front molded spout for pouring or cable routing |
| Duty | Walk-behind floor scrubbers and OEM cleaning machines |
Why Rotational Molding
Plate, hole, spout, handle and ribs all belong to the same piece of polyethylene as the outer skin, so the assembly has no joints to work loose above the pump. Rotomolding gives uniform wall thickness through those transitions, which matters where a flat plate meets a curved wall. Tooling is cast, so plate size and hole pattern follow your drawing and can be revised later.
What to Send Us
Send the cover outline, the equipment that lands on the mounting plate, and how the front spout is used. If this replaces an existing cover, send the part and we take the geometry from it. See also the cleaning equipment housing with service window and the two-piece floor scrubber housing.
FAQ
1. Can the mounting plate be repositioned?
Yes — plate outline, height and hole pattern are mold geometry and follow your equipment layout.
2. Is the front spout a pour outlet or a cable entry?
Either. Tell us which at drawing stage and the opening is molded to suit that duty.
3. Can the cover be run in a single color?
Yes. The two-tone look comes from molding upper and lower parts separately; one resin color works just as well.
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!