Rotomolded Floor Machine Cover


Recessed top opening with a molded handle grab, plus wheel arch openings formed into the bottom edge to clear transport wheels; molded to your machine outline.

Category:

Cleaning equipment series

Description

Product Overview

This blue cover closes the top of a floor machine and hands the moving parts their clearance at the same time. The top surface steps down into a recessed opening with a molded grab for lifting; the lower edge is cut back into wheel arches so the transport wheels turn freely under the shell.

A curved seam line runs down each side. That line is where the cover lands on the machine body, and its shape follows the body profile rather than sitting level.

Clearance Rolled Into the Same Cycle

Wheel arches are the awkward part of a machine cover: they have to be open, strong at the edge, and correct relative to the axle. Here they are formed in the mold with the rest of the shell, so the arch radius and its distance from the axle come out of one tool. Nothing is trimmed after molding.

Because the edge returns into itself at the arch, the opening stays stiff without a reinforcement ring bolted around it. That matters on a machine that rolls over thresholds and cable runs every working day.

Product Specifications

SpecValue
ProductFloor Machine Cover
MaterialLLDPE, per machine drawing
ProcessRotational molding, one-piece shell
StructureRecessed top opening, curved body seam line, returned edges
Wheel clearanceMolded wheel arch openings at the base, position per axle drawing
InterfaceMolded handle grab in the top recess, fixing points per drawing
DutyFloor machines, scrubbers and OEM cleaning equipment

Why Rotational Molding

Recessed opening, grab, curved seam and arches belong to one cycle, which is why the cover fits once instead of being adjusted at assembly. Rotomolding keeps wall thickness even through the arch returns, so those edges carry load without a metal ring. Tooling is cast, so arch height and seam profile are set from your axle and body dimensions.

What to Send Us

Send the machine drawing with axle position and wheel diameter, together with the body profile the cover has to land on. If this replaces an existing cover, send the part. See also the rotomolded machine cover with top opening and the two-piece floor scrubber housing.

FAQ

1. Can the wheel arches be moved?

Yes — arch height and spacing are mold geometry and are set from your axle drawing.

2. Does the top opening accept a control panel?

It can. Send the panel outline and fixing layout and the recess depth is set to suit it.

3. Can the cover be matched to an existing machine color?

Pigment is in the resin, so the color runs through the wall. Send a sample or reference and we match to it.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!