Rotomolded Machine Cover with Intake Vent Lines


Rotomolded machine cover in teal on a black base, with a rectangular top opening and sawtooth intake vent lines. OEM per drawing.

Category:

Cleaning equipment series

Description

Product Overview

This cover closes a cleaning machine from above while leaving room for its controls and its cooling air. The teal shell sits on a separate black base, and a rectangular opening in the top gives space for a display, a control panel or service access.

The front face carries a run of sawtooth intake lines. They are molded with the shell, not cut into it, so the air path is fixed and the face needs no secondary work.

Intake Vent Lines Molded into the Face

The sawtooth line pattern is formed by the tool, so every cover leaves the mold with the same slot depth and spacing. Because the ribs are drawn from the same wall as the shell, the intake area is reinforced rather than weakened, and the face keeps its stiffness around the openings.

Rectangular Top Opening

The opening is sized to the panel or the service point it has to clear, with a flat surrounding seat for the trim or bezel. Give us the panel outline and we set the opening and the seat in the same tool.

Product Specifications

SpecValue
ProductRotomolded Machine Cover
MaterialLLDPE, per machine drawing
ProcessRotational molding, one-piece cover
ColorTeal cover on black base — molded-in color, two separate parts
TopRectangular opening with flat surrounding seat for panel or trim
FrontSawtooth intake vent lines molded into the face
BaseSeparate black base molding
DutyCleaning machines and floor care equipment, OEM builds

Why Rotational Molding

A cover with a formed intake pattern and a rectangular opening has to be made, not assembled from flat panels. Rotomolding forms the vent lines, the opening and the seat in a single cycle, and tooling is a cast mold — so the opening outline and the vent spacing follow your drawing and can be revised as the machine develops.

What to Send Us

Send the cover outline, the panel or control outline for the top opening, and the intake area you need at the front. If this replaces an existing cover, send the old part. See also the blue floor machine cover, the wedge-shaped shroud with inset top panel, and the ventilated cleaning equipment housing.

FAQ

1. Can the top opening be resized?

Yes. The opening and its seat are mold geometry and follow the panel or service point you specify.

2. Can the vent line pattern change?

Yes. Line count, depth and spacing are set in the tool to the intake area your machine needs.

3. Is the base supplied with the cover?

The base is a separate molding. We can supply both to your drawing, or ship the cover alone to match your existing base.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!