Rotomolded Equipment Shroud, Wedge Shape with Panel Seat


Rotomolded equipment shroud in teal with a low wedge profile, a dark grey panel seat, side grooves and a flat rear face. OEM per drawing.

Category:

Cleaning equipment series

Description

Product Overview

A shroud has to cover the machine without standing in the operator's way. This one is rotomolded in teal as a low wedge, rising from a thin front edge to a fuller rear, with contour grooves running along the sides.

A dark grey panel is let into the top surface on a molded seat, and the rear is finished as a flat face that serves as the mounting datum against the machine frame.

Low Wedge Profile

The wedge keeps sightlines open over the front of the machine while still covering the parts behind it. Because the profile is drawn in the mold, the slopes are continuous and the side grooves stiffen the shell without extra parts or ribs added later.

Panel Seat and Rear Mounting Face

The top is formed with a recessed seat that takes the dark grey panel flush, so the panel edge is protected by the surrounding wall. The flat rear face is the surface the shroud is located from, and its hole pattern follows your frame drawing.

Product Specifications

SpecValue
ProductRotomolded Equipment Shroud
MaterialLLDPE, per machine drawing
ProcessRotational molding, one-piece shell
ColorTeal shell with dark grey top panel — molded-in color
ProfileLow wedge, thin front edge rising to a fuller rear
TopRecessed seat taking a dark grey panel flush
SidesContour grooves molded along the flanks
RearFlat mounting face with hole pattern per frame drawing
DutyFloor care and cleaning equipment, OEM machines

Why Rotational Molding

A wedge shell with a panel recess, side grooves and a flat datum face is one continuous part in rotomolding, with no seam across the slopes. Tooling is a cast mold, so the panel seat outline, the groove runs and the rear hole pattern follow your drawing and can be revised while the design settles.

What to Send Us

Send the shroud outline, the panel outline that has to sit in the top, and the rear frame face with its hole positions. If this replaces an existing shroud, send the old part. See also the rotomolded machine cover with intake vent lines and the blue floor machine cover.

FAQ

1. Is the top panel supplied with the shroud?

The panel is a separate part. We mold the seat to your panel outline and can supply the panel to drawing, or ship the shroud ready for your own.

2. Can the rear hole pattern be changed?

Yes. The flat rear face is the mounting datum, and its holes follow the frame drawing you send.

3. Can it be supplied in another color?

Yes, pigment goes into the resin, so the teal is through the wall rather than applied.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!