Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Black J-Curve Solar Pool Shower Column
Cleaning equipment series
Description
Product Overview
Most of this column stands straight up, and only the top leans forward — a J rather than a curve running the whole height. The geometry is chosen for the way it loads the floor: a vertical pillar carries its own weight and the weight of the water inside it straight down into the mounting flange, instead of levering sideways on the fixings. On a pool deck, where the anchor goes into a slab of uncertain thickness, that difference decides whether the installation stays tight for years or works loose over a season.
The shell is one rotomolded hollow body with an even tubular section, so the wall comes out uniform along the full height and the column doubles as the water store. Sun through the day warms the standing water, a cold feed enters low, and the head on the forward arm delivers from above shoulder height. The base finishes in a flat flange with a standard bolt pattern, molded in the same cycle, so there is no separate foot ring to align and no welded joint where the bending moment is highest. Height, thread, flange pattern and color are set per program, and the work runs through our custom rotomolded plastic parts process alongside our other rotomolded marine products.
Product Specifications
| Product | Black J-Curve Solar Pool Shower Column |
| Shell | LLDPE or HDPE, UV-stabilized |
| Form | Vertical pillar, forward bend at the top |
| Section | Uniform tubular cross-section |
| Base | Flat mounting flange, bolt pattern per drawing |
| Outlet | Shower head on the forward arm |
| Water feed | Low-level inlet, hose thread per market |
| Color | Molded into the resin, standard and custom range |
| Dimensions | Per drawing / per program |
Mounting a Tall Thin Column
- The flange takes a moment, not just a weight. Fix into a slab or plate that can resist the lean of a full column in wind, and let the bolt pattern spread the load rather than clustering four fixings close together.
- Keep the bolt pattern standard across the range. If the J and the S models share one drilling, one deck template serves both and a replacement column drops onto the existing studs.
- Drain the column where winters freeze. Water held in the shell expands when it turns to ice, and the split appears on the straight section where nobody looks first.
- Leave the inlet reachable. On a straight pillar the inlet sits low and behind, so plan the clearance to it before the column goes against a wall or a planter.
FAQ
Why a J bend rather than a curve along the whole height?
Load path. The straight section carries the water weight down into the flange, so the fixings work against a smaller lean. The full-curve shape trades some of that for a softer look and a wider foot.
Can the bend be deeper or the arm longer?
Within what the mold will fill evenly, yes. The arm is part of the tool, so the reach is agreed at drawing stage and then repeats identically on every unit.
What fixing does the base need?
The flange is molded with a standard bolt pattern and drilled to your drawing. Send the anchor or deck plate you use and the pattern is matched to it before tooling.
Does the column need a drain?
If the installation freezes, yes. It is a molded feature rather than an accessory, so it belongs on the drawing from the start.
Keywords:
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!