Low-Profile Hydraulic Oil Tank with Flanged Opening


Long, low-profile rotomolded hydraulic oil tank with a large bolted flange opening at the end, vent and return fittings, and mounting along the flat base. One-piece seamless body, supplied in two sizes. OEM.

Category:

Fuel Tanks Series

Description

Product Overview

Under a tractor platform or along a machine chassis, the space left for a hydraulic reservoir is long, low and narrow. This tank is rotomolded as exactly that: a horizontal rectangular body that rides close to the frame, with stepped end sections that follow the structure around it instead of wasting the space above.

The design is supplied in two sizes on the same geometry, so a machine line can offer a larger reservoir without changing the mounting practice or the surrounding layout.

The Flanged End Opening

The large circular opening at the nose is molded with a flat sealing face and a bolt circle around it. Depending on the machine, it takes a suction strainer, a pump mounting plate or an access cover; the bolt load spreads into reinforced material around the ring, not into thin wall. A small fitting on the top edge takes the vent or the return line, and a circular boss molded into the side face accepts a sender, a gauge or a second port.

Send the flange diameter and bolt pattern you need, and the opening is molded to match — the same way the custom vehicle tank takes its sender opening from a drawing.

Mounting

Mounting points sit along the flat base and the stepped faces per your bracket drawing. The tank bolts to the frame the chassis already carries, and the flat faces keep it square without shimming.

Product Specifications

SpecValue
ProductLow-Profile Hydraulic Oil Tank
MaterialLLDPE or HDPE, selected for hydraulic oil duty
ProcessRotational molding, one-piece body
ShapeLong horizontal body, low profile, stepped end sections
Main openingLarge circular opening with bolted flange, per drawing
PortsVent or return fitting on the top edge; side boss for sender or gauge
SizesTwo sizes on the same design
ApplicationTractors, loaders, mowers and mobile hydraulic systems

Why Rotational Molding

A steel reservoir at this shape is folded and welded sheet, and every seam is a place where vibration and oil can find a way out. Rotomolding forms the long body, the stepped ends and the flange ring in one cycle with no seams, and the polyethylene wall damps the pump vibration instead of passing it into the frame. Tooling for the shape is a casting, so port positions can move between sample and production without a redesign.

What to Send Us

Send the bay dimensions with fixing points, the flange drawing for the main opening, the port list and the oil capacity you need. If the tank replaces a steel reservoir, send that one — the flange pattern and mounting points transfer directly.

FAQ

1. Can the flange match our suction or pump plate?

Yes. The opening diameter, sealing face and bolt circle are molded to your drawing.

2. Is the material suitable for warm hydraulic oil?

Polyethylene grades for hydraulic duty are selected at quotation. Tell us the operating temperature range and the medium, and the material follows it.

3. Can the same body run as a fuel tank?

The body style serves fuel with the material and fittings selected for it. Tell us the medium at quotation; see also the square machinery fuel tank and the wedge hood tank for other machinery layouts.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!