Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Custom Long Rotomolded Vehicle Fuel Tank
Fuel Tanks Series
Description
Product Overview
Special vehicles rarely leave a clean rectangle for the fuel tank. The bay is long, shallow and stepped around brackets, batteries and crossmembers — and the tank that fills it is the shape of the bay itself.
This tank is rotomolded to your drawing as a long one-piece body. The top surface steps up and down along the chassis line, the sender opening is molded with a flat face and bolt circle, and the port bosses for filler, outlet, return and vent sit wherever the vehicle plumbing runs. Nothing about the geometry is standard, which is exactly why it holds more diesel than a catalogue tank in the same space.
For a body built around a large flanged inspection opening, compare the long chassis tank with flanged opening.
How the Geometry Is Set
We start from the space. Send the 3D model of the chassis bay with the obstructions marked, and every step, notch and rise is built around them. The sender opening takes your bolt circle, the way the flanges on the L-shaped hydraulic tank take the pump pattern, and each boss carries reinforced material for its fitting.
The fit is settled on paper before the mold is cut. That is what keeps a body this specific affordable: the tool is a casting of the approved geometry, and every cycle repeats it exactly.
Mounting
Mounting inserts are molded into the flat faces and the base from your bracket layout. The tank bolts directly to the chassis brackets the vehicle already carries — no cradle, no straps, no drilling after molding.
Product Specifications
| Spec | Value |
|---|---|
| Product | Custom Long Rotomolded Vehicle Fuel Tank |
| Material | XLPE or LLDPE per duty |
| Process | Rotational molding, one-piece body |
| Shape | Long stepped body built around the chassis bay |
| Sender | Molded opening with flat face and bolt circle per drawing |
| Ports | Filler, outlet, return and vent on reinforced bosses |
| Mounting | Molded inserts on faces and base |
| Application | Special vehicles, trucks and machinery |
Why Rotational Molding
A one-off shape is where rotomolding beats every other plastic process. The mold is cut from your geometry, so an irregular body costs little more than a plain box, and there are no welds, no bonded seams and no assembly jigs. Wall thickness is set by the powder charge and comes out uniform around every step, and the seamless wall takes road shock without a joint to crack.
What to Send Us
Send the chassis bay model with fixing points and obstructions, the capacity, the sender pattern, the port list with thread sizes, and the filler position the operator expects. If the only reference is the tank being replaced, send that instead.
FAQ
1. Can you work from our existing tank sample?
Yes. Send the drawing, a 3D file or the sample part. We review it, note where the poly version needs ribs or a thicker wall, and quote from there.
2. What is the minimum quantity for a custom mold?
Tooling is the main fixed cost, so the volume decides the economics. Tell us the annual quantity and we will say honestly whether a custom mold or a modified existing mold makes sense.
3. Can the tank be a different color from black?
Yes. Color is compounded through the wall and matched to your sample. UV-stabilized compounds are standard for outdoor vehicles.
Keywords:
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!