Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Square Rotomolded Plastic Fuel Tank for Machinery
Fuel Tanks Series
Description
Product Overview
A machinery bay usually offers a clean rectangular volume once the engine and the hydraulics are placed. A square tank uses that volume without any shaped sections it does not need, which also keeps the mold and the price down.
This tank is rotomolded from LLDPE or HDPE as one piece. The body is a plain square section with vertical ribs on the faces, a wide screw cap on the top, and mounting points molded into the sides. Nothing about the shape is decorative; every feature is there to hold fuel in a bay and take bolt load.
The grey version in the photo shows the standard layout: cap centered on the top face, ribs running vertically down the corners and faces, and flat pads where the brackets meet the body.
Inside the Bay
The square section is chosen when the bay is taller than the clearance under it. Where the opposite is true and height is the constraint, the low-profile flat tank is the version to compare.
The wide cap opening is a practical choice for machinery: it speeds filling, allows inspection and cleaning of the interior, and gives room for a coarse strainer if your system uses one.
Mounting and Ports
Mounting inserts and slots are placed from your bracket drawing, on the sides or the base. Outlet, return, vent and drain ports sit on molded bosses wherever the machine plumbing runs. For vehicles that need the same body on a chassis rail, the square truck tank adds top-edge lugs for handling.
Product Specifications
| Spec | Value |
|---|---|
| Product | Square Rotomolded Fuel Tank for Machinery |
| Material | LLDPE or HDPE |
| Process | Rotational molding, one-piece body |
| Shape | Square section body |
| Filler | Wide screw cap, centered on the top face |
| Stiffening | Vertical molded ribs |
| Ports | Outlet, return, vent and drain per drawing |
| Application | Construction and agricultural machinery bays |
Why Rotational Molding
For a plain square body, rotomolding is the lowest-cost way to get a seamless diesel tank. The corners are radii, not welds, so vibration off the engine has no seam to work on. The tooling is simple enough that mid-volume production stays economical, and the wall comes out uniform including inside the corner radii where a formed steel tank thins.
What to Send Us
Send the bay dimensions, capacity, port list and bracket positions. If the tank replaces an existing steel tank, the old part plus the port list is enough to start.
FAQ
1. Is this tank cheaper than a shaped one?
Usually yes. A square body has the simplest mold of any tank shape, and that saving carries through the project.
2. Can the cap take a lock?
Yes. Locked fuel caps are available on the same opening. Tell us the cap specification and we will confirm it.
3. Can the tank be sized to our bay exactly?
Yes. Length, width and height are set from your drawing within the limits of the molding process, and we confirm the wall and capacity at quotation.
Keywords:
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!