Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
60L Rotomolded Motorcycle Diesel Fuel Tank
Fuel Tanks Series
Description
Product Overview
A motorcycle frame has no rectangle to spare: the tank sits against the spine with the seat, the side panels and the rider's knees closing in from every side. This diesel tank is rotomolded as an angular body that follows those contours, with flat faces where the mounts land and tucks where the frame and the rider need clearance.
The capacity is molded straight into the side face — a raised 60L marking that will not rub off or peel the way a sticker does. At the top shoulder, a threaded filler cap sits where the rider can reach it; beside it, a larger top opening takes the sender or the vent line, and the molded ribbing near the base stiffens the wall without adding weight.
Fittings and Markings
The filler neck is molded with a threaded finish and takes a threaded cap; the top opening accepts the sender unit or vent fitting your vehicle specifies. The embossed capacity marking comes out of the mold as part of the wall — no second operation, nothing to fade in the sun. Port positions and mounting points follow your drawing, the same way the custom vehicle tank takes its sender opening.
Mounting
Mounting points sit on the flat faces per your bracket drawing, so the tank bolts into the frame the vehicle already carries. The angular body keeps it square against the mounts without shimming.
Product Specifications
| Spec | Value |
|---|---|
| Product | 60L Motorcycle Diesel Fuel Tank |
| Material | LLDPE or cross-linked PE, per medium |
| Process | Rotational molding, one-piece body |
| Shape | Angular frame-hugging body with embossed 60L marking |
| Filler | Threaded neck with cap, on the top shoulder |
| Top opening | Larger opening for sender or vent, per drawing |
| Capacity | 60 liters, molded into the side face |
| Application | Diesel motorcycles, long-range and utility builds, OEM replacement |
Why Rotational Molding
An angular body with tucks, ribs and an embossed marking cannot be folded from sheet without seams on every corner. Rotomolding forms the whole shape — ribs, bosses, embossing — in one cycle with no seams, and the polyethylene wall absorbs the vibration a motorcycle frame delivers all day. The marking is molded geometry, so it survives sun, mud and pressure washing.
What to Send Us
Send the bay drawing with fixing points, the filler position and thread, the sender or vent specification and the capacity you need. If it replaces an existing tank, send that one — geometry, ports and mounting transfer directly. See also the ATV angular tank and the triangular ATV tank for smaller off-road layouts, or the 5L HDPE UTV fuel can for a strapped trail reserve.
FAQ
1. Is the 60L marking part of the mold?
Yes. The capacity is embossed into the wall during molding, so it cannot peel or fade. A different marking or capacity means a mold revision, which is a casting change.
2. Can the sender opening take our gauge unit?
Yes. The opening diameter and flange are molded to your sender drawing.
3. Does it fit our motorcycle without modification?
This geometry was molded for a specific frame layout. Send your bay drawing or the original tank, and we match the contours and mounting points to it.
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!