Large Capacity Rotomolded Truck Fuel Tank


Molded to your chassis drawing for long-haul range. Baffles and ports formed in one piece. Send the envelope.

Category:

Fuel Tanks Series

Description

Rotomolded Truck Fuel Tank, Built to Your Drawing

This tank is for long-haul trucks, trailers and fleet vehicles that need more range between fuel stops. We mold it as one piece from LLDPE or HDPE, to the shape the chassis allows.

There is no weld along the fuel path. Wall thickness is set from the drawing and can be varied in one area without varying the rest, which is what you want where a strap sits or where the tank takes abrasion. Baffles are molded in the same cycle.

If the frame only allows a narrow section, the narrow chassis tank is built the same way in a smaller envelope. If the tank has to hang behind the cab, use the vertical tank instead.

We are an OEM rotomolded parts manufacturer, so the shape, the capacity, the port positions and the color come from your file. This tank is in our fuel tank series and also listed under automotive plastic parts.

Specifications

SpecValue
ProductLarge Capacity Rotomolded Truck Fuel Tank
MaterialLLDPE or HDPE, grade selected with you for the fuel and duty
ProcessRotational molding, one-piece body
WallSet from the drawing; can be thickened in specific areas
BafflesMolded in the same cycle; count and position fixed in the tool
CapacityNo standard range. Set by the mounting envelope and the range you need. Confirmed from your chassis space and drawing.
DimensionsNo standard range. Confirmed from your drawing or 3D file.
PortsFill, outlet, vent, drain and sender. Layout and size to your drawing.
FuelDiesel is the usual service. Gasoline available; formulation and any permeation requirement confirmed per project.
ColorPigmented through the wall, no paint
ApplicationTrucks, trailers, fleet vehicles
ToolingBuilt to the approved drawing. Material and construction assessed per project against budget and application.
ChangesPorts and inserts changed by swapping the insert. Changes to the mold body are quoted as a separate charge.
Order basisMade to order. MOQ and lead time depend on the drawing and quantity; ask for the current figure at quotation.

Capacity and Baffles

On a truck the capacity is limited by the frame, not by the process. Rotational molding fills whatever space the chassis leaves, so the body can follow the height, the step angle and the clearance around the exhaust. It does not have to be a box or a cylinder.

Long tanks need baffles. Without them the fuel moves forward when the truck brakes and sideways in a turn, and that load goes into the straps and the frame. We mold the baffles into the body in the same cycle. No internal weld, no separate part to come loose.

Baffle count and position are set when the tool is made. That is the part of the layout you cannot change later, so it has to be settled at the drawing stage.

Two other things we ask before quoting. Send the strap positions, the frame rail spacing and the ground clearance, because the mounting points decide the shape more than the capacity does. And settle the fill neck position with the body builder early, since port positions are molded in and a late move is a tooling change rather than a drilling job.

Fuel and Material

Most of these tanks go into diesel service, and that is what the page describes in detail. Gasoline is also within what we build. The fuel affects the material grade, the wall section and, where a permeation limit applies, the barrier arrangement, so tell us the fuel and the standard at the enquiry stage.

Grade and any barrier requirement are confirmed against the fuel and the duty before the drawing is released. We will not put a material forward as suitable for a fuel or a regulation we have not checked it against.

Mold and Production

A sample can be sent for approval before the run. Mold cost tracks the body size and the number of molded-in inserts, not the gallon figure.

Tooling material and construction are assessed per project. A large low-pressure tank and a small high-cycle one do not need the same mold, and the right choice depends on your budget and how the tank is used. We will set that out with the tooling quote rather than applying one standard build to every project.

Once the mold is running, ports and inserts are changed by swapping the insert, so a customer running two port layouts from one tool does not pay for a second mold. Anything that touches the mold body itself is a different matter, and that work is quoted as a separate charge. If you expect the layout to move, say so at the drawing stage and we will design the insert so later changes stay on the insert side.

What to Send

For a new mold we need an editable 3D CAD file, preferably STEP, together with a 2D drawing showing the critical dimensions and tolerances. If you only have a 2D drawing or a written spec, send that and we will review the project and tell you what else is needed.

Along with the files, these help us quote tooling and unit price:

1. Mounting envelope: length, width, height available on the chassis.
2. Target capacity, or the range the vehicle has to cover between stops.
3. Port list with thread sizes. Fill, outlet, vent, drain, sender.
4. Fuel type, and the standard it has to meet.
5. Annual quantity, and whether the ports change between orders.

FAQ

1. What files do you need to quote a new mold?

An editable 3D CAD file, STEP preferred, plus a 2D drawing showing the critical dimensions and tolerances. A 2D drawing alone usually does not define the full mold structure, but send what you have and we will review it and confirm what more is needed.

2. Is the tank available for gasoline as well as diesel?

Yes. Most of our truck tanks are diesel, and gasoline is also within what we build. The fuel decides the material grade and, where a permeation limit applies, the barrier arrangement. Send the fuel and the standard you need to meet and we will confirm the material before the drawing is released.

3. Are the baffles a separate part?

No. They are formed inside the body during molding, so there is no internal weld and nothing to come loose. The catch is that they live in the mold body, so their position is fixed once it is cut.

4. Can the port layout change on a repeat order?

Yes, if the change stays within the insert. Ports and inserts are swapped out, and that is the usual way to run two layouts from one mold. If the change means cutting into the mold body, we quote it as a separate charge. Tell us at the drawing stage and we will design the insert to keep later changes on the insert side.

Other Tanks in This Series

The vertical tank for trucks for cab and frame-rail mounting. The narrow long chassis tank. The square truck tank where the bay takes a straight footprint. All of them come out of the same fuel tank series.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!