Rotomolded Floor Scrubber Cowl with Handle Frame


Molded shell with a separate tube handle frame spanning the rear, a lower skirt and a round front boss with a centre hole; grip geometry changes without new shell tooling.

Category:

Cleaning equipment series

Description

Product Overview

A scrubber cowl closes the top of the machine and takes the pushing and steering loads put into the handle. This one is rotomolded in yellow with a black skirt closing the lower edge, and the front carries a raised round boss with a centre hole. The boss is formed by the mold, so a port or sensor mounted in it lands on a square, repeatable seat rather than on a hole drilled after molding.

The handle is a black tube frame spanning the rear of the shell. It is a separate part from the cowl, mounted after molding, which keeps the shell geometry simple and lets one cowl take different handle heights, bends or grip centres.

Handle Frame Kept Separate from the Shell

Molding the handle into the cowl commits you to one grip height for the life of the tool. Keeping the frame separate leaves the cowl mold as a single cavity with no rear side action, and the frame can be re-specified — tube diameter, bend radius, grip width — without touching the shell tooling. The mounting pattern is molded into the shell, so the frame sits in the same place on every part.

Round Boss for Port or Sensor

The front boss rises out of the shell surface with its centre hole already in place, giving the interface a flat face and a fixed depth instead of a through hole in a curved wall. Tell us the fitting, cable gland or sensor body it has to accept, and we set the boss diameter and hole size in the tool.

Product Specifications

SpecValue
ProductFloor Scrubber Cowl with Handle Frame
MaterialLLDPE, per machine drawing
ProcessRotational molding, one-piece shell
ColorYellow shell, black skirt and handle frame — molded-in color
HandleSeparate black tube frame spanning the rear, mounted to a molded pattern
Front interfaceMolded round boss with centre hole for port or sensor
BaseBlack skirt closing the lower edge of the cowl
DutyWalk-behind floor scrubbers, OEM cleaning machines

Why Rotational Molding

A wide, shallow shell with a raised boss, a skirt line and a mounting pattern is the shape rotomolding produces in one cycle, with no weld and no seam to open under handle load. Tooling is a cast mold, so boss position, skirt depth and the frame pattern follow your drawing and can move while the design settles.

What to Send Us

Send the upper frame drawing, the handle height and tube size you want, and the fitting or sensor the front boss has to accept. If this cowl replaces an existing one, send the old part. See also the two-piece floor scrubber housing and the floor scrubber body with molded handle.

FAQ

1. Is the handle frame supplied with the cowl?

The frame is a separate part. We mold the cowl with its mounting pattern and can supply a tube frame to your drawing, or leave the pattern for your own handle.

2. Can the front boss be resized?

Yes. Boss diameter and centre hole size are mold geometry and follow the fitting you specify.

3. Can the cowl be supplied in another color?

Yes, pigment goes into the resin. The yellow shell and black skirt are molded-in color, not paint or coating.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!