Rotomolded Hinged Housing


Two-part assembly: a lid on molded hinge posts over an open base sump, with screw holes around the perimeter; lid and base built from matched tooling to one drawing.

Category:

Cleaning equipment series

Description

Product Overview

This rotomolded hinged housing is a two-part enclosure: a blue lid carrying molded hinge posts, and an open base that serves as the sump. The lid swings on the hinge line formed at the posts, so reaching the machine's interior is a matter of lifting the cover rather than unfastening a shell.

Screw holes are formed around the perimeter of both parts, giving the enclosure its mounting points and a way to close the two halves down. Because the lid and the base come from tooling built to the same drawing, the hinge posts, the hole pattern and the rim line up as a set.

Hinge Posts Formed in the Mold

The hinge posts are part of the molding, not a bracket added later. They carry the pin load into the shell wall, so repeated opening does not work against a set of fasteners. The base stays open as a sump, which keeps the inside of the enclosure clean and easy to wipe out.

Post spacing, the pin diameter and the perimeter hole pattern are mold geometry. They follow the drawing and can be adjusted while the tool is still a casting.

Product Specifications

SpecValue
ProductRotomolded Hinged Housing, lid and base
MaterialLLDPE, per machine drawing
ProcessRotational molding, hinge posts and hole pattern formed in cycle
ColorBlue; pigment in resin
HingeMolded hinge posts on the lid, pin size per drawing
BaseOpen sump with formed perimeter screw holes
Service accessLid lifts on the molded hinge to open the enclosure
DutyCleaning machines and OEM equipment enclosures

Why Rotational Molding

Housing a hinged lid, an open sump and a full perimeter of screw holes in one part per side is what rotomolding does in a single cycle: the posts, the rim and the holes are formed together, so the two halves fit without shimming. Tooling is a casting rather than a machined block, so hinge spacing and hole positions follow your drawing and stay open to change while the design matures.

What to Send Us

Send the enclosure drawing with the hinge line, pin size, hole pattern and the sump depth marked, plus how far the lid needs to open in service. If this replaces an existing housing, send that part. Related: the cleaning machine body and our cleaning equipment housing.

FAQ

1. Do you supply the hinge pin?

The posts are molded to the pin size on your drawing; tell us the pin you intend to run and we form the bore to suit.

2. Can the base be closed instead of open?

Yes — the sump depth and floor form follow the drawing, including a closed floor where the machine needs one.

3. Can the lid and base be different colors?

Yes. Pigment goes into the resin, so each half can be molded in its own color.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!