Cleaning Machine Water Tank with Pump Sump


White rotomolded cleaning machine water tank with a large round sump opening for an internal pump, a corner port and a skirted stepped base. One-piece seamless body for scrubbers and wash equipment.

Category:

Water Tanks Series

Description

Product Overview

Cleaning machines put the pump inside the water, and that decision shapes the tank around it. This cleaning machine water tank is rotomolded as a white body with a large round sump opening molded into the top center: the pump drops in through the mouth, seats against the molded lip and stays submerged — self-cooling, self-priming, and protected by the same wall that holds the water.

A small port in the corner takes the supply fitting or level sender, and the skirted base steps down to the machine's mounting plane, giving the tank a wide, stable footprint bolted through flat faces.

The Pump Sump

Mounting the pump inside the tank ends the priming problems of external suction lines and shields the pump from the impacts of machine life. The sump mouth is molded with a sealing face and reinforcement around the lip, so the pump load goes into the wall. Sump diameter and depth follow your pump drawing — it is mold geometry, revised as easily as the tank's outline.

Product Specifications

SpecValue
ProductCleaning Machine Water Tank
MaterialLLDPE, per cleaning-machine duty
ProcessRotational molding, one-piece seamless body
SumpLarge round top opening with reinforced lip for internal pump
PortCorner port for fitting or sender
BaseSkirted stepped base, flat mounting faces
DutyScrubbers, wash equipment and cleaning machines, OEM

Why Rotational Molding

A round sump with a reinforced lip is trivial for a mold and awkward for a welder. Rotomolding forms the sump, the port and the skirt in one cycle with the body — no collar to leak, no bracket to shake loose — and the polyethylene wall is quiet in operation, which matters on a machine people stand next to all day.

FAQ

1. Can it take our pump model?

Yes — send the pump drawing; the sump diameter, depth and lip are molded to it.

2. Is a divided version available?

Yes, for machines that carry clean and recovery water in one body, see the partitioned scrubber tank and the yellow solution tank.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!