Yellow Floor Scrubber Solution Tank


Rotomolded solution tank for floor scrubber machines, with molded internal partitions, corner posts, handle recesses and an arched access at the base. One-piece seamless body, OEM per drawing.

Category:

Water Tanks Series

Description

Product Overview

A floor scrubber is really two water systems passing each other: clean solution going down to the deck, dirty recovery coming back up. This tank is rotomolded as a single yellow body that runs both at once — the internal partitions you see from the open top are molded walls, dividing clean from recovery without a single seam for them to leak into each other.

The open top carries the machine's deck interface and a molded sump with its fitting seat; corner posts rise to take the machine's cover or chassis; deep handle recesses in the sides give hands and hoists a grip; and the arched opening at the base clears the squeegee lift or the frame structure beneath.

One Body, Two Water Systems

Fabricated scrubber tanks weld a divider into a box and hope the seam holds. Here the partition walls, the sump and the channels are all the same piece of polyethylene as the outer skin — there is no joint for recovery water to find. That is why the tank lasts the life of the machine and cleans out completely between services.

Product Specifications

SpecValue
ProductFloor Scrubber Solution Tank
MaterialLLDPE, per cleaning-machine duty
ProcessRotational molding, one-piece seamless body
Internal structureMolded partitions separating solution and recovery, molded sump
InterfaceCorner posts, handle recesses, arched base access
FittingsSump fitting seat and bosses per machine drawing
DutyWalk-behind and ride-on floor scrubbers, OEM machines

Why Rotational Molding

This shape — partitions, posts, sump, recesses, arch — exists only because rotomolding can make it in one cycle. A fabricated version would be a dozen welds in the wet zone. Tooling is a casting, so partition positions and sump depth follow your machine's drawing and can move as the design matures.

What to Send Us

Send the machine deck drawing, the sump and fitting layout, and the clean/recovery split you need. If the tank replaces an existing one, send that. See also the grey scrubber tank of the same family and the cleaning machine tank with pump sump.

FAQ

1. Can the clean/recovery split change?

Yes — partition positions are mold geometry and follow your machine's water balance.

2. Can it be supplied in another color?

Yes, pigment is in the resin. This geometry is also produced in grey — see the grey version.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!