Blue Water Tank with Large Filling Opening


Vertical rotomolded water tank in blue polyethylene with a large angled filling opening, a small shoulder spout for overflow or vent, and molded feet. One-piece seamless body, fast fill and easy access.

Category:

Water Tanks Series

Description

Product Overview

Some water stores live by the speed of the fill: a sprayer that needs topping up between runs, a wash-down point that refills between jobs, a site where a hose is the only infrastructure. This tank is rotomolded in blue polyethylene with a large angled opening that takes a hose mouth directly — no funnel, no adapter, no standing around watching a thin neck glug.

The big opening also means the inside can be reached with a hand and a brush, which keeps the tank honest over seasons of use. A small spout on the shoulder takes the overflow or the vent, and molded feet set the body down flat on a deck or pad.

Fast Fill, Easy Clean

The angled mouth is sized and positioned so a full-bore hose fills without splash-back, and the interior is open enough to inspect at a glance. Between the two, the tank spends its time full and working instead of empty and being serviced — which is the whole point of a tank this shape.

Product Specifications

SpecValue
ProductLarge-Opening Water Tank
MaterialLLDPE, UV-stabilized
ProcessRotational molding, one-piece seamless body
ShapeVertical rounded body, angled large opening
OpeningLarge angled mouth for direct hose fill and hand access
SpoutSmall shoulder spout for vent or overflow
BaseMolded feet, flat set-down

Why Rotational Molding

A large opening in a rounded body is a seam-maker in any fabricated tank. Rotomolding forms the mouth, the spout and the feet in the same cycle as the body — one seamless skin, no collar welded into thin sheet. The wall stays uniform around the opening, which is where a lesser tank would crack first.

FAQ

1. Can a lid be added to the big opening?

Yes, a sealed or vented lid follows your drawing.

2. Can it mount on equipment instead of standing?

Yes — bracket interfaces are molded geometry. See also the vertical agricultural tank with vented lid and the vertical cylinder storage tank.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!