Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Vertical Cylinder Water Storage Tank with Ribbed Lid
Water Tanks Series
Description
Product Overview
This tank is a vertical polyethylene water tank for boats, rotational moulded as one piece. On-board water storage space is usually an irregular vertical compartment, and this tank is shaped to the space rather than requiring the layout to change.
Typical installations are bow lockers, head compartments and voids beside berths. Options include an inspection opening for cleaning, moulded baffles against liquid movement, and hold-down points positioned where the joinery can take load.
Product Specifications
| Product | Vertical marine polyethylene water tank |
| Material | MDPE / HDPE / LLDPE - UV-stabilized grade available |
| Process | Rotational molding |
| Shape | Vertical, profiled to the available compartment |
| Structure | One-piece moulded body with no welded seams below the water line |
| Wall Thickness | Made to drawing, set by size and duty cycle |
| Top | Threaded fill cap with inspection opening optional |
| Drain | Position and thread size made to drawing |
| Fittings | Outlet size, thread standard and positions per drawing |
| Color | Custom; black as standard |
| Dimensions | Custom - length, width and height per drawing |
| Capacity | Custom - made to the space and duty cycle you specify |
| Internal | Optional moulded baffles to reduce liquid movement |
| Application | Boat fresh water systems, bow lockers, head compartments, refit projects |
| Production | Rotational molding - OEM production to drawing or sample |
Custom Options
Marine installations differ between boats, so the following are made to the compartment drawing:
- Overall envelope from your compartment measurements
- Inspection opening size and location for servicing
- Hold-down points where the surrounding structure can take load
- Length, width and height to your drawing
- Capacity matched to the space available in your machine or installation
- Wall thickness according to size and duty cycle
- Outlet size, thread standard (BSP or NPT) and fitting locations
- Color, including matching to your specification; black as standard
- UV-stabilized material for equipment that works outdoors
- Material grade: LLDPE, HDPE or MDPE
- Molded-in logo or identification markings
- Drain position, size and thread to suit your plumbing
Additional marine and vehicle tanks are listed in the water tank series; please also see our custom rotomolded water tanks page.
Why Rotational Molding
- The body has no seam welds, so there is no joint line in the area containing water.
- Polyethylene is not affected by salt air or galvanic corrosion in the way metal tanks can be.
- One-piece body without welded seams, so there is no seam line running through the area that holds liquid.
- Wall thickness is set on the drawing and built uniformly around the shape, including at corners and around bosses.
- Rotational molding generally uses simpler tooling than injection molding and can be practical for custom low- and medium-volume production.
Our rotational molding service page covers the manufacturing side.
FAQ
Can this tank be used for drinking water on board?
If it is intended for potable water, tell us at the enquiry stage. We can discuss suitable food-contact PE material, fittings and tank configuration for that application together with you.
Can we clean the inside of the tank?
Yes, we usually include an inspection opening sized for cleaning access. Tell us the space available for it.
Does the tank need internal baffles?
That depends on tank size and where it sits. Baffles reduce noise and movement in partly filled tanks; we can include them if you want that.
Can it be installed horizontally?
This design is intended for vertical installation. If the compartment forces another orientation, tell us and we will look at a different shape.
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!