Double-Support Vertical Water Tank for Construction Machinery


Vertical rotomolded water tank with two moulded support feet for construction machinery. Domed top sheds water. Custom size, drain and mountings.

Category:

Water Tanks Series

Description

Product Overview

This tank is a vertical polyethylene water tank with two moulded support feet, made for construction machinery where the tank sits on a machine deck that flexes in use. The feet are part of the moulding, not bolted-on parts.

A domed top is used so rainwater runs off instead of collecting around the cap. Typical machines are concrete mixers, road machinery and earthmoving equipment. Buyers normally specify overall height, capacity and the fixing points available on their deck.

 

Product Specifications

ProductDouble-support vertical polyethylene water tank
MaterialLLDPE / HDPE / MDPE - UV-stabilized grade available
ProcessRotational molding
ShapeVertical cylindrical body on two support feet
StructureOne-piece moulded body with support feet formed during molding
Wall ThicknessMade to drawing, set by size and duty cycle
TopDomed top with threaded cap
DrainPosition and thread size made to drawing
FittingsOutlet size, thread standard and positions per drawing
ColorCustom; black as standard
DimensionsCustom - length, width and height per drawing
CapacityCustom - made to the space and duty cycle you specify
SupportTwo moulded feet spreading the load over the machine deck
ApplicationConcrete mixers, road machinery, earthmoving equipment
ProductionRotational molding - OEM production to drawing or sample

 

Custom Options

The tank is produced against your deck layout. We can specify:

  • Diameter and height within the space available on the machine
  • Support foot spacing matched to your frame members
  • Cap type and any recessed arrangement
  • Length, width and height to your drawing
  • Capacity matched to the space available in your machine or installation
  • Wall thickness according to size and duty cycle
  • Outlet size, thread standard (BSP or NPT) and fitting locations
  • Color, including matching to your specification; black as standard
  • UV-stabilized material for equipment that works outdoors
  • Material grade: LLDPE, HDPE or MDPE
  • Molded-in logo or identification markings
  • Drain position, size and thread to suit your plumbing

Other construction tanks are shown in the water tank series; see the custom rotomolded water tanks page for quoting details.

 

Why Rotational Molding

  • Two moulded support feet carry the load at both ends instead of concentrating it at one fixing line.
  • Additional material can be built into the support areas where the machine applies load.
  • Material can be LLDPE, HDPE or MDPE, with UV-stabilized grades available for equipment that works outdoors.
  • Pigment is compounded into the resin, so the colour runs through the part and no painting is required.
  • One-piece body without welded seams, so there is no seam line running through the area that holds liquid.

More about how these features are formed is on the rotational molding service page.

 

FAQ

Why two supports instead of one?
To spread the weight of a full tank across more of the machine deck. If you have experienced cracking around a single mounting point, this layout is usually the alternative we suggest.

Can the strap or fixing points match our deck?
Yes. Tell us where the machine structure can accept load and we will place the corresponding features in the tool.

Is the top always domed?
That is the standard version for outdoor use. Other top shapes can be discussed if the installation is under cover.

Which resin should we use for site machinery?
LLDPE is common, with UV stabilization for outdoor machines. If the tank carries something other than water, tell us what and we will discuss material choice.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!