Machine Water Tank with Brass Fittings


Rectangular rotomolded machine water tanks in white polyethylene with brass fittings molded into the wall, supplied in two sizes on the same design. One-piece seamless body, OEM per drawing.

Category:

Water Tanks Series

Description

Product Overview

Inside a machine, a water tank is a fitted piece, not a bought-standalone: it slides into a space defined by frames, guards and hoses. This machine water tank is rotomolded as a rectangular white body sized for exactly that kind of bay, and it is supplied in two sizes on the same design — so a machine line can carry a small and a large option without changing the mounting practice.

The fittings tell you where the tank is going: brass inserts are molded into the wall where the lines connect, giving a metal thread in plastic that survives repeated hose connections over the machine's life, and small capped openings on top take filling and level checks.

Why Brass Inserts

A plastic thread on a machine connection is a service item waiting to strip. The brass inserts are placed in the mold before the cycle, so the plastic forms around them — they become part of the wall, not a fitting glued into a hole. Connect the lines as many times as the service schedule demands; the thread stays square.

Product Specifications

SpecValue
ProductMachine Water Tank
MaterialLLDPE, per machine duty
ProcessRotational molding, one-piece seamless body
ShapeRectangular body, bay-fit geometry
FittingsBrass inserts molded into the wall, per drawing
OpeningsSmall capped openings for filling and level check
SizesTwo sizes on the same design

What to Send Us

Send the bay drawing with fixing points, the fitting list with thread sizes and the capacity you need. If the tank replaces an existing one, send that — geometry, inserts and caps transfer directly. For a version shaped around machine structure, see the L-shaped water tank; for a sloped-top variant, the sloped-top equipment tank.

FAQ

1. Can the brass fittings move position?

Yes. Insert positions are set by the mold, so they follow your fitting drawing.

2. Do the two sizes share brackets?

They share the same design logic, so mounting practice carries over between sizes on the same machine line.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!