Square Green Cold Water Tank with Wide Screw Cap


Square low body for tight plant rooms and machine bays, with a ribbed top face carrying a wide threaded cap and a shaped recess in the front; outlet and bosses per drawing.

Category:

Water Tanks Series

Description

Product Overview

Storage water does not always get a big empty room. Between a wall and a pump set, on a wash pad, under a shed roof, the tank that fits is the one with a square footprint and a height that stays under the lintel. This poly water storage tank is rotomolded as a compact square body in green polyethylene, sized to sit where a round tank would waste the corners.

The wide lid on top gives full access for inspection and cleaning, and the outlet at the base feeds the tap or the pump line. The front face carries an arched recess that takes a hand truck lip, a strap or a pipe that has to cross the body.

Storage Duty, Working Duty

The square body is built for stationary storage with real work around it: wash-down water, garden and site supply, feed water for a small process. The base sits flat on a pad or a stand, the walls take the head pressure without bracing, and the wide lid means the inside can actually be reached when it needs cleaning — not every tank in this class can say that.

Product Specifications

SpecValue
ProductSquare Poly Water Storage Tank
MaterialLLDPE, UV-stabilized
ProcessRotational molding, one-piece seamless body
ShapeSquare footprint, vertical body
LidWide sealed lid for inspection and cleaning
RecessArched front recess for handling or pipe clearance
OutletBottom outlet fitting, size per drawing

Why Rotational Molding

A square body is the shape welded steel wants to avoid — every corner is a seam. Rotomolding forms the square footprint, the lid seat and the outlet boss in one cycle with no seams, and the wall flexes enough to shrug off the knocks of a working yard while staying rigid under head pressure.

FAQ

1. Can it stand on its own base?

Yes, the base is molded flat for a level pad or stand. Send the site drawing if you need a stand interface added.

2. Is the lid interchangeable?

The lid seat is molded geometry; vented or sealed versions follow your drawing. See also the tall rainwater tank and the vertical cylinder storage tank.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!