Tall Green Plastic Water Storage Tank with Handling Slots


Tall vertical rotomolded water storage tank in green polyethylene, with a black screw cap, two molded through-slots for forklift and hand handling, and a low outlet. One-piece seamless body.

Category:

Water Tanks Series

Description

Product Overview

This product is a tall vertical polyethylene water tank made for high-clearance sprayers and tall implements where the space available is narrow and vertical. It is rotational moulded as one piece.

Additional material is built into the lower area where the liquid column loads the tank. Fixing points are moulded at several heights so the tank is supported along its length rather than only at the base. Tell us the clear width between frame members and we will size to it.

 

Product Specifications

ProductTall vertical polyethylene water tank
MaterialLLDPE / HDPE / MDPE - chemical-resistant and UV-stabilized grades available
ProcessRotational molding
ShapeTall vertical body
StructureOne-piece moulded vertical body with heavier wall at the base
Wall ThicknessMade to drawing, set by size and duty cycle
TopThreaded vented fill cap as standard; other configurations available
DrainPosition and thread size made to drawing
FittingsOutlet size, thread standard and positions per drawing
ColorCustom; black as standard
DimensionsCustom - length, width and height per drawing
CapacityCustom - made to the space and duty cycle you specify
MountingFixing points moulded at several heights along the column
ApplicationHigh-clearance sprayers, tall implements, narrow frame pockets
ProductionRotational molding - OEM production to drawing or sample

 

Custom Options

Dimensions follow the vertical space available on the machine. Points we can specify:

  • Width to fit between existing frame members
  • Wall build in the lower section according to capacity
  • Fixing points where your frame can take load
  • Length, width and height to your drawing
  • Capacity matched to the space available in your machine or installation
  • Wall thickness according to size and duty cycle
  • Outlet size, thread standard (BSP or NPT) and fitting locations
  • Color, including matching to your specification; black as standard
  • UV-stabilized material for equipment that works outdoors
  • Material grade: LLDPE, HDPE or MDPE
  • Molded-in logo or identification markings
  • Drain position, size and thread to suit your plumbing

Other agricultural layouts are listed in the water tank series; please see our custom rotomolded water tanks page.

 

Why Rotational Molding

  • Wall thickness can be increased locally in the lower area without making the whole part heavier.
  • Several fixing heights spread the load instead of relying on a single base mounting.
  • Rotational molding generally uses simpler tooling than injection molding and can be practical for custom low- and medium-volume production.
  • Bosses, inserts, slots and flanges are formed during molding, which reduces secondary assembly steps.
  • Material can be LLDPE, HDPE or MDPE, with UV-stabilized grades available for equipment that works outdoors.

More about the process is on our rotational molding service page.

 

FAQ

Is a tall tank stable enough on sloping ground?
Height raises the load centre, so it depends on the machine frame and how loaded it runs. Multiple fixing heights and adequate wall build are how we address it - share the layout and we will comment.

Can you reinforce the base?
Yes. Extra material in the lower wall is standard practice for tall tanks of this type.

Which thread does the outlet use?
BSP or NPT according to your plumbing. Size and position follow your drawing.

Can the tank be made see-through?
A natural translucent grade gives operators a rough read on remaining liquid; that is usually enough for sprayer work.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!