Insulated Pallet Container (Blue)


Meta Description: Rotomolded insulated pallet container with two-way fork entry, four corner latches and a low drain. Square footprint, no pallet needed. Get a quote.

Category:

Various rotational molding box series

Description

Product Overview

Square footprint, tall walls, molded instead of sitting on a pallet. This is the container for plants that run forklifts and have learned to do without pallet boards: one piece carries its own product, sits flat on the floor, and slides into a rack space with nothing underneath it.

Handling is designed into the shell. Fork pockets pass through the base in both directions, the top rim is molded stiff enough to take a seated lid and a stacked load, and the corners are where the material is concentrated, because a corner is what hits the dock first. The plug sits low in the end wall within reach of a pallet truck, and the lid latches at four corners so a full box is held at four points rather than two. Wall thickness, lid seal and drain position are set per order.

Product Specifications

ProductInsulated rotomolded pallet container
ShellFood-grade HDPE or LLDPE, one-piece double wall
InsulationFoam core in walls and lid, thickness per program
LatchesCorner latch points, four-sided hold
DrainMolded drain, low end wall, position per program
BaseMolded fork pockets, two-way entry, no pallet required
FootprintStandard range; custom envelope per program
ColorBlue standard, pigment to order
ServiceOEM production with molded marking per program

Pallet Handling Without a Pallet

  • Tall walls do what a pallet does and then some: the load is contained, the box sits flat, and nothing has to be strapped down to hold it in place on a moving floor.
  • Two-way fork entry means a chiller aisle or a dock lane can be worked from either side without spinning the box on the forks, which is where a lot of bulk containers take their first crack.
  • Impact is a corner event. Dock contact, cart collisions and dropped forks all land there, so that is where the wall stays thickest and the section most forgiving.
  • The return leg costs floor space rather than equipment: empties stack on each other, so nothing has to be stored as a box, a lid and a pallet separately.

FAQ

Forklift, pallet truck or both?
Both, where the base is specified for the truck's fork height. Tell us which machines run in the plant and the pocket height goes straight into the tool.

Can loaded boxes be stacked?
Stacking depends on lid stiffness, wall thickness and what is inside, so we build for the stacked height you actually need rather than quote a number. The lid is the component carrying the stack. For shallow, hand-worked bodies in the same double-wall construction, see our insulated fish tub range.

Does the lid open while the box is on the forks?
It can, and it is worth deciding deliberately. Latch positions, lid weight and lift-off versus hinged all change how a box is worked at the far end of a run.

Will it fit our existing pallet footprint?
That is normally the first thing we match. Footprint, height, drain position and latch layout are tooled per program, and unusual envelopes are quoted as custom rotomolded plastic parts cut to your footprint.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!