Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Insulated Container with Hinged Lid (Yellow)
Various rotational molding box series
Description
Product Overview
A working box in a food plant gets dropped, hosed, stacked and shunted by a pallet truck inside the same shift. This insulated container is built for that routine rather than for the back of a delivery van: straight walls that square up in a chiller, a lid that returns to the same position every time, and a base cut for fork entry so the box rarely has to be lifted by hand.
The lid is what keeps a box in service for years. It seats on molded corner lugs, dropping back into place after a hundred washdowns with no hinge to align; a hinged version is specified per program where the lid has to stay attached. Inside, the corners are formed with a radius rather than a tight seam, so product and rinse water both find their way out. A molded drain is added per program at whichever corner suits the plant's tipping direction, and pigment carries the line coding, yellow as the standard.
Product Specifications
| Product | Insulated container with hinged or seated lid |
| Shell | Food-grade LLDPE or HDPE, one-piece double wall |
| Insulation | Foam core in walls and lid, thickness per program |
| Lid | Seated on molded corner lugs; hinged option per program |
| Base | Molded fork pockets, two-way entry |
| Drain | Molded drain, position per program |
| Size | Standard range; custom footprint per program |
| Color | Yellow standard; line coding to order |
| Service | OEM production, molded branding per program |
Lid Register, Fork Entry and Washdown Detail
- Four corner lugs locate the lid by shape alone. Nobody has to line it up by eye, and a box pushed rather than lifted does not walk its lid out of position.
- Fork pockets pass through the base in both directions, so a loaded box can be turned in a chiller aisle without being set down and picked up again.
- Radii at the inner corners and a liner with no fasteners give rinse water one route out. Empty boxes are stacked on their sides to drain, so the rim is formed to take that.
- One tool carries many pigments: a plant can code by product, by allergen zone or by customer without new tooling, which usually costs less than labels and survives longer.
FAQ
Does the lid come hinged?
The standard build is a seated lid that lifts off, which is what most plants ask for because nothing collects under a hinge. A hinged lid is available per program and uses the same lug pattern.
Can it hold hot product?
Insulation works in both directions, but the resin and the foam grade are chosen per program. We ask for load temperature and dwell time before specifying, because that decision belongs with the material rather than with a general claim.
How is it emptied?
By tipping. The drain sits at the low corner for your tipping direction, and the lid comes off completely so the box can be hosed, turned over and stacked. Deeper lidded bodies for bulk use are covered on our insulated rotomolded pallet container page.
Do you supply repeat orders?
That is the point of a tool: unit two hundred matches unit one, with size, drain position and colour code held on the drawing. A different footprint or lid arrangement is quoted as custom rotomolded plastic parts run to order.
Keywords:
Previous
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!