Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Wheeled Rotomolded Cooler
Various rotational molding box series
Description
Product Overview
Two wheels, a folding tow handle and a lid that opens in halves answer one question: how far does this have to travel while it is full of ice? A loaded cooler gets lifted twice a day and dragged twenty times, so the wheels and the handle carry the weight and the body is shaped to be pulled rather than carried. Beach rental fleets, poolside service and retailers buy this layout for that reason.
Hardware is treated as the replaceable part: it is what fails first on a wheeled box. The tow handle pivots on a molded boss, the axles run through formed sockets in the base, and the wheels are specified per program so a fleet can restock a worn set without retiring the box. The lid splits over the hinge line: the front section lifts while the tow handle stays folded down, which is what a server wants when reaching in one-handed. Pigment goes into the resin and brand panels are molded or applied per order.
Product Specifications
| Product | Wheeled rotomolded cooler |
| Shell | UV-stabilized LLDPE, one-piece body |
| Insulation | Foam core between walls, thickness per program |
| Lid | Split lid on a molded hinge line, both sections latching |
| Mobility | Over-size wheels on molded axle sockets, folding tow handle |
| Drain | Molded drain, position per program |
| Color and branding | Custom pigment; molded or applied brand panel |
| Size | Standard range; custom per program |
| Service | OEM for rental fleet and retail programs |
What the Wheel and Handle Layout Changes
- Moving the load off the wrist is the point of the frame. On sand the over-size wheel does what it does in a hotel corridor: the job is decided by ground clearance and a body line that does not dig in when the box is tilted back.
- A split lid opens the near half without folding the tow handle away. The reach is shorter, and staff do not walk around the box to serve the far side.
- Axle sockets and the handle boss are molded into the shell rather than bolted through it, so the wall is not pierced, and the parts that wear come off with a spanner.
- Branding goes where it is seen: the long side panel and the lid top. Colour sits in the resin and survives sun and salt without a repaint, and tooling can carry a molded mark or a flat area for a label.
FAQ
Will the wheels manage sand and gravel?
Wheel size and axle position are chosen so the shell clears soft ground, and tread and wheel material are specified per program. Rental operators treat wheels as a service item, so they are supplied on their own.
Does the split lid weaken the chill?
The two halves meet over a molded ridge and both sections latch down. Foam runs continuous through the lid, so there is no uninsulated slot down the middle.
Can our brand go on the box?
Colour, molded marks and applied graphics are all set per program. Short runs use standard-range bodies; a private tool carries the branding molded in. Retail packaging work runs through our custom rotomolded plastic parts program.
Where does it drain?
The drain is a molded feature and its position is fixed per program, usually at the handle end of a wheeled box so one person can tip and drain it. Tell us the tipping direction and it is cut that way. The same shell is offered as a fixed rotomolded cooler without the wheel frame.
Keywords:
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!