Long Hard Equipment Case with Foam


Rotomolded long hard case with fitted foam lining and ribbed lid for instruments and tooling. OEM lengths, foam cut to your drawing. Get a quote.

Category:

Various rotational molding box series

Description

Product Overview

Built around one long narrow cavity, this case exists for the gear that refuses to fit a square box: survey instruments, optical kit, coiled umbilicals, long tooling, spare barrels. The shell is rotomolded from UV-stabilized LLDPE in a single piece, so the corners are continuous material rather than joints, and the wall thickness that helps it survive a loading dock is still light enough to carry by the molded end handle.

Most of the thinking sits in the lid. Ribs run across it in a repeating pattern, adding stiffness without a second material or a metal insert, and they key the lid so it does not spring when the latches come down. Catches are spaced along the long edge rather than crowded at the corners, because mid-span is where a long lid lifts first. The foam inside is cut to the load instead of laid in as a flat slab. Length, rib pitch, latch count, gasket profile, lining thickness and the foam cut file are all set per order.

Product Specifications

ProductRotomolded long hard case for equipment
ShellUV-stabilized LLDPE, one-piece rotomolded
LidRibbed lid, lift-off, no hinge
ClosureDraw latches along the long edge, count per program
LiningClosed-cell foam, cut to load / per drawing
HandleMolded end handle, carry strap option
Length and sectionStandard range; custom per program
ColorBlack, gray, custom pigment
ServiceOEM program, foam cut file per drawing

How the Foam and Ribs Protect a Load

  • Fitted foam touches the item on its faces and its corners. A flat slab leaves the load free to travel first, and by the time the foam begins absorbing energy, the instrument has already picked up speed.
  • Ribbing runs across the short axis of the lid. A long lid deflects at mid-span, so the stiffness goes where the span is longest and the catches are furthest apart.
  • With no hinge the lid lifts off completely: no pin to corrode, no half-open position to be crushed by a pallet edge, and the case opens from either side in a rack.
  • Latch bodies are specified per program, plastic or metal. The hooks are the wear part and are ordered with the case, so a fleet gets the same replacement part years later.

FAQ

Who cuts the foam - you or us?
Send the outline of the item or a CAD file, and the lining is machined to it before the case ships. It can also ship with uncut foam if you would rather fit the lining locally.

What stops a catch being torn off when the case is stacked?
Nothing on the outside protrudes past the latch line, so a pallet edge sliding across the top cannot shear a catch. Where a case is thrown rather than lifted, metal-body hardware is specified.

Can we order a different length, or a wheel kit?
Length, section and rib pitch are tooled per order, with a standard range covering common sizes. Wheel sets and trolley frames are quoted with the shell as a rotomolded equipment case project.

Is it watertight?
A gasket in the lid channel keeps rain, dust and spray out. Full submersion is a different gasket and latch specification, and is quoted as such rather than claimed for the standard build. Foam grades, lining layout and mounting hardware can all be changed with the program through custom rotomolded plastic parts built to your drawing.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!