Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Insulated Fish Tub (Blue, Latches)
Various rotational molding box series
Description
Product Overview
Shallow, wide and lidded, this tub is the shape a fish hold asks for: whole fish laid flat in ice rather than heaped in a deep well, so the weight stays low and the load can be read from above without digging into it. Quays use it for the leg between boat and auction floor, where a tub gets loaded, stacked, weighed and re-iced inside the same hour.
The working parts here are the corner straps and the plug. Four latches pull the lid down and flex rather than snap when a hook or a boot catches them, and they are supplied as a spare. The drain sits in the low corner of the end wall, so meltwater and brine leave with a short tilt and no pump, right where someone standing at the edge of the quay can reach it. Fork pockets are formed into the base, and the flared rim gives the lid a full seat and doubles as a lifting edge.
Product Specifications
| Product | Insulated fish tub with corner latches |
| Shell | Food-grade HDPE or LLDPE, one-piece double wall |
| Insulation | Foam core between walls and in the lid |
| Latches | Strap latches at the corners, replaceable |
| Drain | Molded drain plug, low corner of the end wall |
| Base | Formed fork pockets, two-way entry |
| Profile | Shallow and wide; depth range per program |
| Color | Blue standard, pigment to order |
| Service | OEM production with molded marking per program |
Drain Position and Latch Behaviour on a Quay
- The drain is set in the end wall because tubs are emptied by tilting the short side over the dock edge. A centre drain would mean draining the tub flat, in place, in everybody's way.
- A strap latch fails in the right direction. A rigid clip that lets go is a latch lost over the side; a strap that stretches still holds the lid until it can be swapped.
- Depth changes how the load sits. A shallow tub keeps less product below the meltwater line, which is why whole-fish buyers usually ask for this profile instead of a deep one.
- The flared rim takes the daily abuse - hooks, the next tub off the stack, the edge of a sorting table. It is molded thick for that reason, since a rim cannot be repaired afterwards.
FAQ
Which depth suits whole fish?
Shallow for fish landed flat and iced in layers, deeper for fillets, brine or mixed loads. It is not really about volume; it is about how much product ends up sitting under water.
Can the plug be moved to another wall?
Drain position is fixed in the tool. If a different wall suits you better, we would want to know the tipping direction first, because that is usually what decides it. A different profile or rim detail is quoted as the custom rotomolded plastic parts service.
Do you sell lids and latches on their own?
Lids are part of the assembly and latches ship as spares, so a fleet stays in use instead of being retired over a missing strap. The same double-wall build in a deeper body is described under our insulated fish tub family.
How is it moved when full?
Forks enter the base from either side, and the flared rim is a two-person lifting edge. Crews take the forks when they can; the rim is there for the day the truck is parked on the wrong side.
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!