Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Canopy Pontoon Paddle Boat
Water activity facility series
Description
Product Overview
Two molded pontoon hulls carry a deck platform and bench seating; the canopy is mounted on four uprights above the seating area, and a tubular railing runs along the bow. Everything structural is either molded into the hulls or bolted through reinforced pads, which is the practical difference between a boat that can be re-fitted on site and one that has to go back to a workshop.
The boat is supplied as a complete unit, with the deck, seating, canopy and rails matched to the hull. Drive and steering configuration — paddle wheel, pedal drive or outboard — is confirmed at quotation, since it changes the deck layout and the hull mounting points.
Applications
- Park and scenic-area lakes: the core use case — guest hire boats on sheltered water.
- Resort and hotel waterfronts: fleet boats that need to look uniform and stay presentable.
- Water parks and family entertainment venues: shallow-water rides where boarding ease matters more than speed.
- Camping and recreation sites: rental boats with a canopy for sun protection during long hire periods.
Material & Manufacturing
- LLDPE pontoon hulls: impact flexibility for dock contact and beach landings; each hull is a sealed hollow body.
- One-piece hull molding: no hull-to-deck seam, so the buoyancy chamber has no joint to seal.
- Canopy and rails: molded canopy panel on metal uprights; railing in corrosion-resistant tube, mounted on reinforced pads.
- Wall thickness: heavier section at the hull keel, deck mounting pads and rail fixings; lighter through the freeboard.
- UV-stabilized compound: hull and canopy color are in the material, chosen for permanent outdoor exposure.
Structural Design
- Twin-pontoon buoyancy: two separate sealed hulls mean a single hull breach does not sink the boat — the reason this layout is standard for hire craft.
- Deck platform: spans the two hulls on reinforced mounting pads; the deck carries seats and passenger load, the hulls carry buoyancy.
- Boarding: low freeboard and a wide, flat deck edge allow step-on boarding from a dock without a ladder.
- Canopy mounting: uprights land on thickened pads rather than on the thin canopy panel, so wind load goes into the structure.
- Railing: bow rail is through-bolted to reinforced deck sections, with backing where the deck is cored.
- Load planning: passenger count, canopy wind area and drive weight are reviewed together at design stage.
Quality Inspection
- Water-fill check on each hull: both pontoon bodies filled and observed separately, so a leak in one hull is not masked by the other.
- Leak check at fittings: deck mounting bolts, rail fixings and any through-hull item checked individually.
- Visual inspection: hull and canopy color, surface finish and molded details against the approved sample.
- Dimensional check: hull spacing, deck height, canopy position and rail mounting points against the drawing.
- Wall thickness sampling: keel, deck pads and rail mounting zones.
- Assembly check: canopy uprights, rails and seats fitted and checked for alignment before packing.
OEM & ODM
- New pontoon shapes: drawings or reference boats assessed for moldability before tooling quotation.
- Seating layout: 2, 4 or 6 seat configurations, with or without a central table well.
- Canopy: flat or curved panel, with or without side screens; color to match the hull.
- Drive and steering: paddle wheel, pedal drive or outboard mounting — confirmed at quotation because it drives the deck and hull interface.
- Color: molded-in hull color and canopy color, single or two-tone.
- Sampling and tooling: first samples for approval; existing-mold variants avoid new tooling. Full range: water activity facility series.
FAQ
Is the canopy strong enough for wind?
The canopy is a large sail area, so its uprights are mounted on reinforced pads and the frame is sized to the panel. For exposed sites subject to strong prevailing wind, tell us the location — mooring and canopy specification should be decided together, not separately.
Can guests fall out?
The boat is a low-speed hire craft with a bow railing. Supervision and site rules do the rest; the hull shape is deliberately stable rather than sporty.
Do you supply the drive unit?
Drive configuration is agreed per order. Because drive type changes the deck layout and mounting points, it needs to be settled before the hull specification is frozen.
How is it shipped?
Hulls, deck and canopy are packed for container shipment, with assembly at destination. Assembly points and fixings are documented so a local team can complete the build.
Keywords:
Previous
Next
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!