Rotomolded Row Boat


A one-piece rotomolded row boat with molded bench seating and divided storage compartments. It is the plainest product in the series and for that reason the most widely used: a stable, low-maintenance tender for ponds, lakes and shoreline work where a painted timber or GRP dinghy would need repainting or gelcoat repair every season. The hull comes out of the mold in one piece, so water has no seam to work into.

Category:

Water activity facility series

Description

Keyword Tags: rotomolded row boat | HDPE dinghy | plastic rowboat manufacturer | fishing dinghy | LLDPE boat hull | lake tender boat | one piece row boat | row boat OEM China | molded bench seat boat | dock tender

Product Overview

The hull, gunwale and internal bench structure are molded as one wall. That single-wall construction does several things at once: it removes the hull-to-deck joint, it lets the seats and compartment dividers stiffen the boat instead of sitting on top of it, and it keeps the interior free of the ribs and frames that collect water and dirt in a timber boat.

Shown configuration: three transverse bench seats with molded compartment dividers between them, a flat transom area, and a molded bow deck. Rowlock and outboard positions are added to your specification.

Applications

  • Lake and pond tenders: general shore-to-mooring transport.
  • Fishing boats: stable platform for still or light tackle work on sheltered water.
  • Resort and park hire: simple rowing boats for guest use where maintenance time is limited.
  • Aquaculture and site work: utility hull for feeding, inspection and net handling.
  • Flood and rescue support: robust, non-corroding hull for standby use.

Material & Manufacturing

  • LLDPE / HDPE hull: LLDPE for impact flexibility on beach landings, HDPE where extra stiffness is wanted for a longer hull.
  • One-piece molding: hull, gunwale and internal structure form in a single cycle.
  • No wetted seam: the shell is continuous below the waterline; there is no joint to seal or re-seal.
  • Wall thickness control: extra material at the keel, transom and seat mountings; lighter section through the freeboard.
  • Color in the resin: no paint or gelcoat to maintain — scuffs do not open up a different color underneath.
  • UV-stabilized compound: selected against the sun exposure of your market.

Structural Design

  • Bench seats as structure: the molded benches and dividers act as transverse stiffeners, so the hull does not need a separate frame.
  • Compartment layout: divided bays keep gear separated and add buoyancy volume in the ends.
  • Transom: thickened and flattened for an outboard bracket or a sculling oar position, per your specification.
  • Gunwale: rolled edge with a defined radius — comfortable to grip and resistant to thinning during molding.
  • Draft and capacity: hull volume is matched to your intended load; confirm target payload before finalizing the cavity.

Quality Inspection

  • Water-fill check: hull filled and observed for seepage at the transom, drain plug or any fitted item.
  • Leak check at fittings: drain plugs, rowlocks and any bracket checked individually.
  • Visual inspection: surface, color and molded details against the approved sample.
  • Dimensional check: length, beam, depth and seat positions against the drawing.
  • Wall thickness sampling: keel, transom and seat junctions.
  • Seat and gunwale check: finished edges and load-bearing junctions reviewed.

OEM & ODM

  • New hulls from drawings: STEP or IGS files reviewed for moldability before tooling is quoted.
  • From a sample boat: measure-and-copy is workable for established hull shapes.
  • Size changes: length, beam and depth adjustable within molding limits.
  • Layout changes: number of benches, compartment divisions, oarlock and outboard positions, drain location.
  • Color: molded-in color, single or two-tone.
  • Sampling: first samples approved before production; other shapes in the water activity facility series.

FAQ

Can I fit an outboard?

The transom can be specified for a small outboard bracket. Tell us the engine weight so the transom section and hull volume are set accordingly — a transom designed for oars only is not the same as one designed for thrust load.

How many people does it carry?

Capacity follows hull volume and bench layout, so it is fixed per size rather than per model name. Confirm your intended payload and we will size the boat to it.

Does it need maintenance?

No painting and no gelcoat work. Normal care is rinsing after saltwater use and checking drain plugs and fittings — which is the practical reason operators move from timber to polyethylene.

Will it deform on a trailer?

A hollow polyethylene hull should be supported along the keel and chine when stored or trailered; point loading on an unsupported span is what causes deformation, not the material itself.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!