Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Blue Diesel Transfer Tank with 12V Pump
Fuel Tanks Series
Description
Product Overview
A yard that runs diesel equipment spends more time fetching fuel than anyone admits. A drum and a hand pump is slow, and a steel bowser rusts from the outside in. The fix is one molded body that stores the diesel and carries the pump.
This tank is rotomolded in blue polyethylene as a single piece, with the pump, delivery hose and nozzle mounted directly on the body. The top face is recessed into a bay: the cap sits inside it, the pump bolts to the molded surface, and the hose coils into the recess where it cannot be knocked off or stood on.
The base carries molded forklift pockets, so the tank is placed once by forklift and works as a refueling point from then on. For the same body without the pump kit, see the flat tank with top neck.
The Recessed Pump Bay
Putting the working parts inside a recessed bay does three jobs. It protects the pump and nozzle from impact, it keeps the hose off the ground, and it leaves a flat surrounding rim for lashing straps when the tank is transported. The filler cap sits in the same bay, so filling and dispensing happen in one position.
The 12V pump connects to a vehicle battery or a fixed supply. Tell us your pump specification and voltage, and the mounting pattern is set from it; we can also supply the tank as a bare body for your own pump kit.
Handling and Mounting
The forklift pockets are molded into the base skirt in the same cycle, sized to a standard fork section. Fixing points along the sides take hold-down brackets for permanent installation on a yard slab or a vehicle bed.
Product Specifications
| Spec | Value |
|---|---|
| Product | Blue Rotomolded Diesel Transfer Tank with Pump |
| Material | LLDPE, UV-stabilized |
| Process | Rotational molding, one-piece body |
| Pump kit | 12V pump, delivery hose and nozzle; pump model per specification |
| Filler | Screw cap inside the recessed top bay |
| Handling | Molded forklift pockets in the base skirt |
| Fixing | Side points for hold-down brackets |
| Color | Blue as shown; warning marking per requirement |
| Application | Yards, farms, fleets and worksite refueling |
Why Rotational Molding
Diesel containment leaves no room for leaks. A rotomolded body is one seamless piece with no weld seams to fail and no base joint to corrode, and the recessed bay, forklift pockets and pump mounting face all form in the same cycle, so nothing that carries load is bolted through a thin panel afterwards.
What to Send Us
Send the capacity, the pump specification with voltage and flow, and whether the tank stands in a yard or rides on a vehicle. Tell us the fork section if it will be lifted, and the marking language for the safety label.
FAQ
1. Can we get the tank without the pump kit?
Yes. The bare body is available with the pump mounting face molded in, so your own kit bolts straight on.
2. Can the tank ride on a truck bed?
Yes, with the hold-down brackets fixed through the side points. Tell us the vehicle and we will confirm the fixing layout.
3. Which diesel blends are suitable?
Standard diesel and biodiesel blends are handled with the compound selected for the project. Tell us the medium and working temperature.
4. How is it checked before shipment?
Dimensions, wall and leak tightness are checked against the drawing, and the pump kit is tested as an assembly when supplied fitted.
Keywords:
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!