Rotomolded Spherical Mooring Buoy


A spherical rotomolded buoy with molded side lugs and a reinforced attachment point, molded in one closed polyethylene shell. The sphere is the efficient shape for a mooring float: for a given volume it presents the least surface and sheds load from any direction, which is why it holds station in tidal flow and swell better than a boxy float of the same displacement. With no seam and no foam core, buoyancy stays constant through service.

Category:

Water activity facility series

Description

Product Overview

The buoy is a single hollow shell with two molded side lugs and a top attachment area. Buoyancy comes from the sealed air chamber, so the float does not take on water weight over time — the reason foam-filled floats lose freeboard after a few seasons. The lugs are formed in the mold at thickened sections rather than bonded on, so line or net load transfers into the shell wall.

Typical use is as a mooring float on a riser chain, a support float along a barrier or net line, or a position marker where a compact, high-visibility float is wanted.

Applications

  • Mooring systems: riser float on swing moorings and pick-up buoys for small craft.
  • Aquaculture: net, cage and longline support floats; spat and harvest markers.
  • Marinas and boatyards: mooring and fender floats, swim-area boundary floats.
  • Barrier and boom lines: flotation along containment and demarcation lines.
  • Marine works: marking anchors, cables and dredge lines.

Material & Manufacturing

  • LLDPE / HDPE shell: LLDPE for impact tolerance where boats and tenders make contact; HDPE for a stiffer wall.
  • One-piece molding: the sphere is molded closed in a single cycle; the lugs form with the body.
  • Seamless surface: no welded half-shells, which is the usual leak path on assembled sphere floats.
  • Wall thickness: uniform through the body, thickened at the lugs and the attachment zone.
  • UV-stabilized compound: pigment in the resin, so the buoy keeps its color without a coating.

Structural Design

  • Sealed buoyancy chamber: air volume set against the target buoyancy and the freeboard needed under mooring load.
  • Molded lugs: two side attachment points at thickened sections for line, net or connector hardware.
  • Load path: line tension is carried through the shell wall rather than through bolts that can loosen or become a leak path.
  • Sphere geometry: equal response to load from any direction, and no flat face to slap in chop.
  • Surface: molded finish resists marine growth better than a porous or painted surface; fouling can be cleaned without damaging the color.

Quality Inspection

  • Water-fill check: body filled and observed, so seepage at a lug or insert shows up before shipment.
  • Lug check: each attachment point inspected and load-checked as fitted.
  • Visual inspection: color, roundness and surface finish against the approved sample.
  • Dimensional check: diameter, lug position and spacing against the drawing.
  • Wall thickness sampling: at the poles and around each lug.

OEM & ODM

  • Diameter and volume: sized to your buoyancy requirement rather than to a fixed catalogue size.
  • Attachment layout: lug position and number, through-rope arrangement, shackle or swivel interface, and connector geometry for modular lines.
  • Color: molded-in color, including high-visibility options; two-color configurations where the mold allows.
  • Marking: molded lettering, numbering or reflective banding for identification and night visibility.
  • New shapes: from drawings or a reference float; sampling before production. More flotation options in the water activity facility series.

FAQ

How much can it lift?

Net buoyancy depends on the molded volume and the wall weight, so it is calculated per size. Tell us the load the float must support — chain weight, net tension or structure — and we will size it with a working margin rather than quoting a nominal figure.

Can the lugs take a mooring chain load?

The lugs are molded into thickened sections so the load goes through the shell. For heavy chain or high snatch loads, a shackle and thimble arrangement should be specified with the buoy rather than running rope directly through the lug.

Does it need to be filled with foam?

No. The shell is sealed and hollow, so buoyancy does not rely on foam. A sealed hollow body also means no water absorption and no change in weight over the seasons.

Will marine growth damage it?

Growth can be cleaned off the molded surface without damaging the color. Unlike painted steel or coated foam floats, there is no coating to break down in the process.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!