Sloped Low-Profile Water Tank with Dual Caps


Flat low-profile rotomolded water tank in white polyethylene with a sloped top face, a black filler cap, a small red cap and a side port. One-piece seamless body for angled bays and decks.

Category:

Water Tanks Series

Description

Product Overview

The space is flat and so is this tank. This low-profile water tank is rotomolded as a slim white body whose top face slopes gently — following a deck line, a step in the bay, or simply keeping the filler at the highest point of the body so it fills completely.

A black filler cap sits on the slope; a smaller red cap beside it takes the vent or a sender; and a port on the side face serves the supply line. The slim section is the whole idea: water where there is only a water-tank's worth of height to put it — under a deck, inside a cleaning machine, along a vehicle wall.

Sloped, Not Flat

The slope does two jobs. It clears structure that steps across the bay, and it puts the filler neck at the top of the volume, so the tank takes a full fill and vents honestly. If your bay slopes the other way, the geometry follows your drawing — the slope is mold casting, not a fixed feature.

Product Specifications

SpecValue
ProductSloped Low-Profile Water Tank
MaterialLLDPE, per duty
ProcessRotational molding, one-piece seamless body
ShapeSlim body, sloped top face
CapsBlack filler cap plus small red cap
PortSide port for supply line, per drawing
DutyAngled bays, vehicle decks, cleaning machines

Why Rotational Molding

A slim tank lives or dies by its corners — the sloped face meets the side walls exactly where slosh stress peaks. Rotomolding rounds those transitions into one seamless wall, so the body flexes with the load instead of cracking along a fold, and both caps and the port are molded bosses with no added plates.

FAQ

1. Can it mount against a sloped bulkhead?

Yes — send the bulkhead angle and the slope is set to it.

2. Is a version without the slope available?

Yes, a flat-top low tank is a tooling revision. See the low vehicle tank with flange for a related geometry.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!