Horizontal Water Storage Tank with Saddle Base


Horizontal cylindrical rotomolded water tank in white polyethylene, standing on four molded saddle feet with a sealed top lid for inspection. One-piece seamless body for stationary storage.

Category:

Water Tanks Series

Description

Product Overview

Where a tall tank would poke through a low roofline or block a sightline, the horizontal cylinder earns its place. This tank is rotomolded as a horizontal cylindrical body in white polyethylene and stands on four saddle feet molded as part of the wall — the cylinder never touches the ground, and the load goes into the feet the way the mold intended.

The white body shows the water line and keeps the contents at a steady temperature under sun, and the sealed lid on top gives access for inspection and filling. The result is a straightforward storage tank that sits low, holds steady and cleans out easily.

Installation Notes

The four saddles set the tank down on any level pad without a built cradle. Keep the lid accessible — it is the inspection and filling point — and take the supply from the lower body through a fitting sized to your line; the boss location follows your drawing.

Product Specifications

SpecValue
ProductHorizontal Water Storage Tank
MaterialLLDPE, UV-stabilized
ProcessRotational molding, one-piece seamless body
ShapeHorizontal cylinder
BaseFour molded saddle feet
LidSealed top lid for inspection and filling
DutyStationary water storage on pads and under low roofs

Why Rotational Molding

The cylinder is the shape water pressure likes best, and rotomolding is the process that makes it seamless: body, saddles and lid seat form in one cycle, so there is no weld sitting in the wet zone and no cradle to fabricate. The wall thickness comes out uniform, which is what keeps a long horizontal body from sagging over the years.

FAQ

1. Can it be linked in a bank of tanks?

Yes — outlet and equalization fittings are set to your drawing so a row of tanks can share one feed.

2. Is this suitable for transport?

It is designed for stationary storage. For tanks that move while full, see the water cartage tank with fork channels.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!