Heavy-Duty Rotomolded Equipment Case


Rotomolded polyethylene equipment case with double-wall construction, custom foam insert, lid and hardware options. Made to your equipment list and drawing.

Category:

Various rotational molding box series

Description

Product Overview

This battery box cover is a rotomolded PE lid for heavy truck battery boxes. The top surface is slanted with a ribbed pattern: the ribs stiffen the cover so it can stand up to footsteps and road vibration, the slope and the grooves together let rainwater drain off instead of pooling on top of the batteries.

The cover is molded as one piece from UV-stabilized polyethylene, so it carries no paint or coating to chip off in wash-down or winter road salt. This lid style is widely used on European heavy trucks, for example on FM / FH series battery boxes, and we mold it to your box drawing. It is one of our rotomolded vehicle parts.

Product Specifications

ProductHeavy Duty Truck Battery Box Cover
MaterialLLDPE / HDPE / MDPE
ProcessRotational Molding
StructureOne-piece molded cover
Top SurfaceSlanted, ribbed design for drainage and grip
Wall ThicknessCustom according to size and load
DimensionsCustom, made to box drawing
FixingsCustom clip, bolt or hinge points to drawing
ColorCustom (black as standard)
ApplicationBattery boxes and protection covers on heavy trucks and commercial vehicles
ProductionCustom OEM / Made to Drawing

Custom Options

The cover is produced to the battery box it fits. Options include:

  • Custom length, width and height to the box drawing
  • Rib pattern and slope angle set to your design
  • Clip, bolt or hinge fixing points molded in place
  • Wall thickness set for foot traffic or cover-only duty
  • Molded-in logo or part number
  • Custom color, black as standard
  • UV-stabilized material for outdoor exposure

Send us the box drawing or a sample cover, and we will check the tooling and unit price. More about our rotational molding service is on the company page.

Why Rotational Molding

  • One-piece cover: no welded corners or fastened seams to work loose under road vibration.
  • Ribs and bosses come out of the mold: the drainage ribs and fixing points are formed in the same molding, with no extra assembly.
  • Rotational molding generally uses simpler tooling and can be practical for custom low- and medium-volume production.
  • PE is unaffected by battery acid splashes, road salt and wash-down water, with no coating to maintain.
  • Tool changes are easier than injection molding for fitting the cover to different box sizes.

FAQ

  • Can you make the cover to fit our battery box?
    Yes. The cover is made to the box drawing, including the rib layout, slope and fixing points. If you can send the box dimensions or an existing cover as a sample, we can quote from that.
  • What is the ribbed surface for?
    The ribs stiffen the top so the cover resists foot traffic and vibration, the slope drains rainwater off the batteries, and the grooves give grip in wet weather.
  • Will the cover hold up in winter road conditions?
    The material is UV-stabilized PE and is not affected by road salt or wash-down water. If your application includes sustained high temperature near the exhaust side, tell us at enquiry stage so we can discuss a suitable material grade.
  • Can we order the cover without the battery box?
    Yes. We mold the cover as a separate part to your drawing. Existing molds can be used where the size fits, or a new mold can be discussed for a custom size.

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!