Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
Products
Rotomolded Chemical Dosing Tank
Various rotational molding box series
Description
Product Overview
This is a one-piece rotomolded PE dosing tank for chemical storage, dosing and mixing duties. The cylindrical body is molded seamless, with no welded joints on the shell. Nozzles on top, lifting lugs on both sides, a side outlet and a reinforced flange base are all formed as part of the molding.
Typical uses include chemical dosing systems, small reaction and mixing vessels, water treatment make-up tanks and dosing packages for industrial wastewater plants. Standard color is blue; other colors can be molded for product or line identification. Capacity, dimensions and fitting positions are made to your drawing — see our custom rotomolded plastic parts service for the tooling and development process.
Product Specifications
| Product | Chemical Dosing Tank |
| Material | LLDPE / HDPE / MDPE — UV-stabilized grade available |
| Process | Rotational Molding |
| Shape | Cylindrical, vertical |
| Structure | Seamless one-piece shell with integrated top nozzles, lifting lugs and flange base |
| Wall Thickness | Custom, set by capacity, chemical and installation |
| Top | Open or closed top, with molded nozzles for filling, venting or agitator mounting |
| Outlet | Side outlet; position, size and thread to suit your plumbing |
| Base | Reinforced molded flange skirt for stable bolting or free-standing installation |
| Lifting | Molded-in lifting lugs on both sides |
| Fittings | Custom according to drawing |
| Color | Custom (blue as standard) |
| Dimensions | Custom |
| Capacity | Custom |
| Application | Chemical Dosing, Water Treatment, Industrial Wastewater, Mixing Vessels |
| Production | Custom OEM / Made to Drawing |
Custom Rotomolding
The tank is produced by rotational molding, so the shell, nozzles, lugs and base flange come out of the mold as one part. This matters for chemical service: there are no welded seams on the tank body, which are the usual points for leaks on fabricated tanks.
We can adjust the capacity, diameter and height, wall thickness, nozzle positions and sizes, outlet thread, base flange diameter and fixing hole pattern to your drawing. Material can be selected for the chemicals in your process — tell us what will be stored or dosed and we can discuss suitable PE grades. Existing molds can be used directly where the size fits; new tooling is quoted separately.
Why Rotational Molding
For this tank, three points are specific to the process:
- Seamless construction: the cylindrical shell is molded in one piece, without welded seams that can weep under chemical or wastewater service.
- Integrated nozzles and lugs: fill nozzles, outlets and lifting lugs are molded into the part, so they carry the load without depending on added welds or glued fittings.
- Reinforced flange base: the base skirt is formed as part of the tank, giving a stable seat for bolting down or placing on a platform.
General advantages of rotational molding for parts like this:
- Consistent wall distribution on a hollow part, with no thin spots at corners.
- PE material does not rust or corrode and is suitable for outdoor installation when a UV-stabilized grade is used.
- Rotational molding generally uses simpler tooling and can be practical for custom low- and medium-volume production, so changing capacity or fitting layout is usually straightforward.
FAQ
Can the tank hold aggressive chemicals?
PE suits many acids, alkalis and salt solutions, but chemical resistance depends on the specific chemical, concentration and temperature. Tell us what will be stored and we can discuss whether PE is suitable and which grade to use.
Can you add a nozzle for an agitator or mixer?
Yes. Top nozzles can be sized and positioned for agitator mounting, venting or filling according to your drawing.
How is the tank installed?
The flange base can be bolted to a platform or floor, or the tank can stand free on the base skirt. Lifting lugs on both sides allow the empty tank to be handled by crane or forklift with appropriate rigging.
Can I get my own capacity and fittings?
Yes. Capacity, dimensions, wall thickness, nozzle and outlet layout are made to drawing. Send us the required capacity and a sketch or 3D drawing, and we can check whether an existing mold fits or what tooling would be needed.
Keywords:
Previous
Product inquiry
Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!