Blog

05

2026

-

11

Custom SXS Fuel Tanks for Side-by-Side Vehicles: OEM Manufacturing


Custom SXS fuel tanks to your drawings: side-by-side structure, mounting and clearance requirements, and what to send for a quotation.

A custom SXS fuel tank has to fit around more than the available space. Seat bases, roll cage tubes, cargo beds, driveline tunnels and suspension travel all influence the tank's shape, mounting position and usable capacity. For SXS manufacturers and aftermarket brands, getting these details right before tooling begins can help avoid costly fitment changes during sample evaluation.

This page is written for SXS brands, side-by-side manufacturers and accessory companies sourcing a tank for a new or revised machine. It covers what is specific to a side by side fuel tank project — the machine structure that sets the envelope, the mounting arrangements that come up, and the requirements a tank is specified against inside a machine that carries occupants at speed. The development route itself, from drawing review through tooling to sample evaluation and production, is described on our custom rotomolded UTV fuel tanks page; what follows is the SXS layer on top of it.

Jinsumei is a rotational molding manufacturer working from customer drawings, samples, and technical specifications. We provide manufacturing feedback on what can be molded and what may need to be adapted for the process. Your engineering team remains responsible for the tank design, vehicle fitment, fuel-system integration, and application approval.

What makes a side-by-side tank project different

The words overlap — many machines answer to both names — but in a tank project the packaging is distinct. Four structural differences come up repeatedly.

AspectWhat it means for the tank
Seating and roll cageTwo or four seats inside a protective structure; cabin-adjacent space is framed by tubes and crossmembers rather than open frame rails
Cargo bedA working bed behind the cabin — tanks sit under it, ahead of it or in it, and a dump bed pivots through an arc
Wheelbase and drivelineLonger machines route a driveshaft along the tunnel; tank geometry has to clear it and the service access around it
Suspension travelLong-travel suspension moves wheels and control arms through a large arc; clearance has to hold at full compression, not only at rest

How tanks sit across off-road machine families generally is set out in where fuel tanks sit across off-road machines. The structural requirements the tank is specified against — vibration, slosh, strap tension, bed loads — are set by your engineering team against the machine's duty cycle. What we review is whether the proposed geometry molds well: wall distribution, rib layout, radii, draft, and which features are better formed in the tool than machined afterward.

Where a side-by-side tank sits

The locations below come up in projects, and each carries its own constraints. Which location applies — and the clearances it needs — is decided by your engineering team against the machine's structure.

LocationTypical constraints
Under the seatsHeight set by the seat base; width by frame rails and the tunnel
Mid-frame, beside the tunnelClearing the driveshaft and shift linkage; leaving service access
Under the cargo bedFloor height, what the bed carries, and the pivot arc if the bed dumps
In the bedTreated as cargo or a strapped accessory; bed floor and rack interfaces
Behind the rear axleClearance through suspension travel and around tow interfaces

Two of these usually lead to rotomolded geometry that follows the space rather than a box: under-bed and mid-frame tanks often have one flat mounting face and several shaped faces that clear structure. Rotational molding can accommodate many contour-following shapes, recessed areas and integrated mounting features, subject to tooling access and part geometry. Flat faces that need stiffness are handled through how ribs stiffen flat tank walls.

Filler position deserves its own check. On a caged machine the filler neck has to land where a nozzle and a gloved hand can reach it, which means clearing the cage tube, the seat base and any bed tilt — and the vent where it will not take in debris. Both positions are part of the connection details your team specifies; both are fixed in the tool, so both belong in the brief before tool design.

Clearance through suspension travel

Clearance is often the missing piece in a first SXS brief. A tank that fits the envelope at rest can interfere at full compression, where wheels, arms and shafts occupy a different part of the frame — and on a long-travel machine the difference between the two positions is measured in inches, not millimeters.

What we ask for is the envelope with that travel included: the component positions at full compression, supplied by your engineering team, the restricted areas around them, and the filler reach zone as it exists on the assembled machine. With that, the molding review runs against the space the tank actually occupies. Without it, interference tends to surface at sample evaluation instead of at drawing review — which is a later and more expensive place to find it.

Mounting points and structure

Mounting arrangements for an SXS tank run from molded-in features to hardware fitted after molding. Which applies is part of the mounting method your engineering team specifies; what it decides on our side is what is formed in the tool and what is machined or assembled afterward.

  • Molded features. Bosses, pads, strap seats and recessed seats formed into the wall.
  • Insert-mounted. Threaded inserts and grommets fitted after molding, to the specification you supply.
  • Bracket interfaces. Flat pads or slots that take cage-adjacent or bed-mounted brackets from your mounting kit.
  • Ports and connections. Fill, vent, supply, return and sender openings formed as bosses or machined to position.

Send the mounting method and connection details with the envelope: both decide what gets molded and what stays a secondary operation, and both are easier to change on a drawing than in a tool.

Slosh belongs in the same conversation on a crew machine. Fuel moving inside a tank is a real input on machines that carry occupants at speed. Internal baffles can introduce additional manufacturing complexity in a one-piece rotomolded tank; where fuel slosh control is required, the tank geometry, internal features and mounting arrangement should be reviewed together during the design stage, so the tank accounts for it before samples.

Capacity, spares and transfer

Capacity follows the machine class and the duty cycle — a two-seat sport machine, a four-seat crew model and a utility machine with a working bed carry different tank targets, and how the fleet refuels decides how much of that target is range and how much is reserve. Where the requirement is a carried spare rather than an integrated tank, two HDPE fuel reserve bodies are already in production: a compact 5L spare fuel body and a larger 20L reserve, both poured rather than plumbed, with the cap and vent positions set in the tool.

One rule of the process follows the capacity figure: it is fixed at tool design. The internal volume is set by the mold, so the target with its tolerance belongs in the brief before the tool is designed, and a later change generally means tooling work rather than an adjustment. On machine classes where the envelope is tight — sport machines especially — the capacity target and the mounting space are worked out together by your engineering team before anything reaches us as a drawing.

Where fuel has to be moved mechanically — between machines, or from a bulk store to a fleet — the product is a transfer tank rather than a vehicle tank; an SXS fuel transfer tank covers that job and is a different brief. Materials for any of these are reviewed against the specified fuel and service conditions; final material suitability and application validation stay with your engineering team — see selecting a fuel tank material.

Working with Jinsumei

Jinsumei is a custom rotational molding manufacturer supporting OEM projects for off-road and powersports applications. Operating from an 8,000 m² production facility with a 60-person team, we manufacture custom fuel tanks and other large-size plastic components based on customer drawings, samples and technical specifications. Project information is treated as confidential, and private-label programs are not disclosed without authorization.

Our production support covers tooling preparation, material processing, rotational molding, secondary operations and quality inspection, according to the agreed project requirements. Checks through production are defined according to the product specification and project scope; how they are arranged is described in quality control for fuel tanks. Initial samples are provided for evaluation on your machine, against the agreed drawings and reference dimensions.

Frequently asked questions

Is an SXS fuel tank different from a UTV fuel tank?

The words overlap, and so do the machines — buyers arrive searching an SXS fuel tank, an SXS gas tank or a side by side fuel tank, and often mean the same machine. In a project, the difference is packaging: side-by-side seating, a roll cage, a cargo bed and a longer wheelbase change the space a tank can occupy and what it has to clear. The manufacturing route — drawing review, tooling, samples, production — is the same.

Can you build tanks for four-seat crew models?

Yes, to your drawings. Crew cabins change the available space and the mounting structure, not the process; the envelope and clearances come from your engineering team.

Can you work from a frame or bed drawing instead of a tank drawing?

Yes. An envelope brief is workable: we review rotational molding feasibility against the space and provide structural suggestions tied to the process — wall distribution, rib layout, radii, and which features are better molded than machined. The final design stays with your engineering team.

What machine data does an envelope brief need?

The seat base and bed floor heights, the tunnel width, the component positions at full suspension compression, the restricted areas around them, and the filler reach zone on the assembled machine. Filler neck and vent positions are part of the same brief, since both are fixed in the tool. Your engineering team supplies the machine data; we review the proposed geometry against it.

Can an existing UTV tank design be adapted to a side-by-side?

Sometimes. A geometry developed around one frame has to clear different structure on another, so the review is the same as any drawing review: what holds, what needs adjusting, what the new envelope rules out. Send both the design and the target mounting space.

Do you make spare or transfer tanks for side-by-sides?

Spare: yes — the two carried reserve bodies in production cover the 5L and 20L sizes. Transfer: that is a different product family with its own bodies. Neither connects to the machine's fuel system; an integrated second tank is a custom development.

What should we send to quote a project?

3D drawings or the mounting envelope, the machine class, the capacity target with tolerance, the fuel type, the mounting method and connection details, and the estimated annual volume. What each input decides is set out in what a molder needs before quoting.

Have a side-by-side tank project in development?

Three things get a project moving, and any one of them is enough to start.

  • Send your STEP or IGS drawing. Dimensioned 2D drawings work too, along with a sample part if one exists.
  • Share your mounting envelope. Frame and bed space, full-compression clearances, and the mounting method you intend to use.
  • Tell us your target capacity and annual volume. With the fuel type and the machine class, that is enough for a first manufacturing review.

If the brief is still open, send what you have — a frame drawing, a photograph of the space, or a capacity target that has not been fixed yet. The reply covers what can be molded as drawn, what needs adjusting for rotational molding, and what is still open.

Contact Jinsumei for custom SXS fuel tank manufacturing based on your drawings, samples, or mounting requirements — or send the brief through our contact page.

side by side fuel tank, custom SXS fuel tank