Foshan Nanhai Jinsumei Environmental Protection Plastic Product Co., Ltd.
04
2026
-
11
UTV Auxiliary and Extended Range Fuel Tanks | OEM Manufacturing
Explore 5L and 20L carried UTV fuel reserves and custom plumbed auxiliary tank manufacturing for OEM, fleet and aftermarket programs.
A UTV runs out of fuel at the point where the working day outgrows the tank. Shifts get longer, sites move further from the pump, and machines come back empty rather than interrupt a crew's schedule. By then the main tank is settled, and the question becomes what to add: a second tank plumbed into the machine, or a reserve that travels with it.
This page covers both routes for UTV auxiliary fuel tank programs. One is the carried reserve: two bodies we already mold, in 5L and 20L, that strap into a bed or rack and are poured rather than plumbed. The other is the plumbed auxiliary tank — a custom tank body manufactured to drawing, intended for installation on the machine and connection to its fuel system. It is written for accessory brands, fleet and rental programs, and vehicle OEM teams: the buyer is a business specifying a range-extension product for a catalogue or a machine program, not an owner shopping for one can.
Jinsumei offers two carried-reserve options already in production, along with custom plumbed auxiliary tank bodies manufactured to customer drawings. We are a rotational molding manufacturer working from customer drawings, samples and technical specifications. We provide manufacturing feedback on what can be molded and what may need to be adapted for the process. Your engineering team remains responsible for the tank design, vehicle fitment, fuel-system integration and application approval.
Two routes to more range
Once the main tank is no longer enough, three options may be considered. They differ mainly in whether the existing fuel system changes and how the additional fuel is stored or supplied.
| Route | What it is | What changes on the machine | Typical program |
|---|---|---|---|
| Carried reserve | A 5L or 20L rotomolded body carried on a bed, rack or bracket | Carrying position and securing arrangement are specified for the intended application; the reserve is poured, not plumbed | Accessory brand private label; fleet issue stock |
| Plumbed auxiliary tank | A second tank mounted on the machine and connected to the fuel system | Mounting points, plumbing, transfer and venting are defined by your engineering team | Vehicle OEM or accessory brand engineered kit |
| Larger main tank | The existing main tank replaced with a higher-capacity part | Tank cavity, mounting and connections must be considered against the vehicle layout | New development, or a replacement program built on the original part |
The larger-main-tank route is a separate brief. New development to drawing or envelope is covered on our Custom UTV Fuel Tanks page; reproducing an existing main tank is a replacement project, where an original part is copied rather than added to. A carried reserve does not require integration with the vehicle's fuel system, while a plumbed auxiliary tank is specified as part of the machine's fuel-system architecture. Where a second tank sits relative to the main tank and the rest of the fuel system is set out in off-road fuel tank types and applications.
Carried reserves: the 5L and 20L bodies
Jinsumei currently produces two carried-reserve bodies for UTV and off-road accessory programs: a compact 5L UTV fuel tank and a larger 20L UTV spare fuel tank. Both are manufactured as one-piece rotationally molded HDPE shells, but each has its own molded geometry, filling arrangement and carrying features.
5L UTV Fuel Tank
The 5L body is designed as a compact carried reserve for aftermarket accessory ranges, dealer programs and fleet applications.
Its molded structure includes X-shaped ribs on both faces, an integrated top handle, an angled screw filler cap and a separate vent fitting. A recessed central bay incorporates a horizontal slot that takes a strap or bracket plate.
The handle, ribs, cap seat, vent boss and strap slot are formed as part of the molded geometry. These features are incorporated into the body during molding rather than added as separate shell components.
20L UTV Spare Fuel Tank
The 20L body provides a larger carried-reserve option for programs with more available storage space.
Its structure includes a molded top handle, a deep recessed face panel for strap placement, horizontal ribs along the side wall and a flat back designed to sit against a bed floor, rear rack or shelf.
Filling is through a black screw cap positioned beside the handle, with a white inner seal cap underneath. A diagonal recess around the cap area helps keep the filling zone clear of the strap path.
Comparing the Two Capacities
The 5L and 20L bodies serve different capacity requirements. Their molded features and carrying arrangements are not identical, so the intended mounting space and strap layout should be reviewed separately for each product.
Both capacities are fixed by their existing molds. A different capacity requires new tooling rather than a simple adjustment to the existing body.
For programs that need a private-label range, color and branding requirements can be reviewed against the existing mold structure and project drawings. Changes to molded features, such as the cap position, vent location, strap slot or rib layout, may require tooling modification or a new mold.
Both products are carried reserves: fuel is stored in the body and poured when needed. They are not designed as plumbed components connected to a vehicle's fuel system. Where fuel has to be moved mechanically rather than poured, the brief moves to transfer tanks — a different product family.
Before Tooling: What to Confirm
A carried reserve needs to be considered together with the space and hardware used to carry it. Before tooling or customization begins, several details should be confirmed:
- Mounting envelope: the available space on the UTV bed, rack or bracket, including surrounding clearances.
- Strap or bracket layout: the position and width of the strap, anchor points and any bracket interface.
- Filler access: whether the cap can be reached and opened when the body is in its intended carrying position.
- Fuel and closure requirements: the specified fuel type and the corresponding material and seal requirements.
- Branding and color: the required color reference and whether branding is molded into the part or applied separately.
These inputs help establish which features can be retained from an existing body and which changes need to be reviewed as tooling requirements.
Choosing the capacity
Capacity decisions for an extended-range program depend on the intended reserve volume, available carrying space and operating requirements. Three inputs help define the specification.
- Capacity target. The choice between 5L and 20L depends on the program's intended reserve volume and application requirements. The appropriate capacity should be specified against the intended use rather than assumed from the vehicle category alone.
- Weight and space. Fuel adds load to the machine. The available carrying space, the position of the reserve and the machine's rated capacity should be considered by your engineering team.
- Fuel handling method. A carried reserve stores fuel for manual pouring when needed. A plumbed auxiliary tank is a separate option for programs that specify fuel transfer through the vehicle's fuel system.
For programs where fuel needs to be transferred without manual handling, a plumbed auxiliary tank may be considered. Carried reserves remain a separate option for programs that use portable fuel storage. The two routes may also be specified separately within the same product range, depending on the program requirements.
Plumbed auxiliary tanks: the custom route
A plumbed auxiliary tank is a second tank mounted on the machine and connected to its fuel system. Its configuration depends on the vehicle's fuel-system architecture. The tank body is manufactured to the agreed drawings, while the integration requirements are defined by the customer's engineering team.
| Decision | Responsibility |
|---|---|
| Mounting envelope and structure | Your engineering team, working from the machine's frame and available space |
| Transfer method, valving and switching | Your engineering team |
| Venting, filtration and fuel connections | Your engineering team |
| Fuel compatibility and application approval | Your engineering team, based on the specified fuel and service conditions |
| Tank geometry, wall structure, ribs, bosses and ports | Manufactured to your drawings, with manufacturing feedback from Jinsumei |
On the manufacturing side, the body follows the rotational molding route for a custom tank. Features such as mounting bosses, ribs and recessed areas can be incorporated into the molded geometry according to the agreed drawings. Openings may be formed as molded features or machined to the specified position, depending on the design and project requirements. How that route runs from drawing review to first parts is covered in how a custom plastic fuel tank is made, and how flat surfaces can be stiffened is covered in reinforcing rib design. Initial samples are provided for evaluation against the agreed drawings and intended application.
Material grades can be reviewed against the specified fuel and service conditions. Final material suitability and application validation remain with your engineering team — see fuel tank material selection.
One commercial point shapes this route: custom tooling is part of the project scope. Tooling investment should be considered against the expected program volume and future demand before development begins. The carried bodies use existing tools, while a custom plumbed auxiliary tank is quoted according to its drawings, tooling requirements and agreed scope.
Why rotational molding suits a second tank
Both the standard carried bodies and custom tank bodies can be manufactured through rotational molding. The process allows the tank body and selected structural features to be formed as one molded structure.
- One-piece shell. The main body can be formed as one molded structure rather than assembled from multiple welded shell sections.
- Molded carrying features. Handles, ribs and recessed strap areas can be incorporated into the molded body, allowing the carrying arrangement to be considered as part of the product geometry.
- Geometry for available space. Custom tank shapes can be developed around the space and dimensional requirements specified in the customer's drawings.
- Color through the material. Pigment is incorporated into the HDPE material rather than applied as an external paint layer. Color requirements can be reviewed against a supplied reference.
OEM supply from Jinsumei
We support OEM manufacturing projects for off-road and powersports applications, providing custom rotational molding production based on customer drawings, samples and technical specifications. Our manufacturing support may include tooling preparation, material processing, rotational molding, secondary operations and quality inspection, depending on the agreed project scope.
For plumbed auxiliary tanks, your engineering team remains responsible for tank design, vehicle fitment, fuel-system integration and application approval. Jinsumei's manufacturing scope is the molded tank body produced to the agreed drawings and specifications. Project information is treated as confidential, and private-label programs are not disclosed without authorization.
Quality checks are defined according to the product specification and project scope; how those checks are arranged is described in fuel tank quality control.
Frequently asked questions
What is the difference between an auxiliary tank and a spare tank?
An auxiliary tank is a broad term for a second tank used alongside a machine's main tank. A spare or reserve tank can refer to a carried body: secured for transport and poured by hand when needed. A plumbed auxiliary tank is a separate tank connected to the vehicle's fuel system. Buyers may also search for a UTV auxiliary gas tank, but the intended product configuration determines which type is required. Jinsumei's existing 5L and 20L bodies are carried reserves.
Can the 5L or 20L body be connected to the machine's fuel system?
No. The existing 5L and 20L bodies are designed as carried reserves, not as tanks connected to a vehicle's fuel system. A connected second tank requires a separately specified custom tank body, with fuel-system integration defined by your engineering team.
Do you offer other capacities?
On the carried bodies, capacity is fixed by the tool: 5L and 20L, with other sizes requiring new tooling. A plumbed auxiliary tank is manufactured to your drawings, with its capacity specified according to the intended application and available mounting space.
Can the carried bodies carry our brand?
Color is incorporated into the HDPE material, and branding options such as molded-in lettering or a flat label pad can be reviewed at drawing stage. The selected approach depends on the existing mold structure and any tooling changes required.
What should we send to quote a program?
Please provide the intended route, machine class, capacity target, fuel type, mounting or strap layout and estimated annual volume. For a custom tank, drawings or a sample can help establish the manufacturing requirements. What each input helps determine is set out in what a molder needs to quote.
Adding range to a machine program?
Whether the requirement is a carried reserve for your catalogue or a custom plumbed second tank for a machine program, send us the details that define the project:
- The route: carried bodies, a custom plumbed tank, or both
- Machine class and available carrying or mounting space
- Capacity target and fuel type
- Strap layout or tank-body drawings and connection requirements
- Estimated annual volume and own-label requirements
Tell us where the program stands and we can review what the existing bodies offer, what a custom tank requires from your drawings, and which manufacturing details still need to be confirmed. Contact Jinsumei for UTV auxiliary and extended range fuel tank manufacturing.
UTV auxiliary fuel tank, UTV extended range fuel tank,OEM fuel tank supply