Blog

17

2026

-

11

Custom Rotomolded Roof Box Manufacturing for Off-Road Applications


This custom roof box was developed for an overseas off-road equipment brand. Jinsumei manufactured its large, hollow PE body through rotational molding, while separate components were produced and assembled according to the agreed project scope.

The project involved more than molding a large plastic shell. The body also needed to match the customer's drawings, with mounting areas and component interfaces prepared for the final assembly.

Project Overview

The customer designs storage equipment for off-road and overlanding use, and supplied drawings and finished-product requirements for a vehicle roof box. Product design and application validation stayed with their engineering team; Jinsumei's work was on the manufacturing side.

Rotomolded Main Body Manufacturing

Molded from polyethylene (PE), the main body is a single hollow shell, formed without welded seams or joined panels.

The body ran through the same rotational molding process Jinsumei uses across its tank, housing and equipment programs — from material charging through heating, cooling and trimming.

Before production, the supplied drawings were reviewed from a rotational molding perspective. Jinsumei then handled molding, trimming and dimensional checks, with particular attention to the mounting and hinge interfaces.

For components supplied by other parties, assembly and inspection were coordinated according to the agreed project requirements.

Component Integration and Assembly

A finished roof box requires more than a molded shell. Hinges, latches, mounting hardware and trim components all need to work with the main body.

The position of each component matters. Hinge points, latch positions and mounting locations need to align with the molded body's geometry. These interfaces were considered as part of the manufacturing and assembly process.

If you are planning a similar product — an equipment housing, a custom plastic storage box or a vehicle component — it pays to involve the molder early enough that these interfaces are reviewed before tooling.

Finished Product Design and Details

The finished roof box combines the molded body with separately produced functional components. The body was manufactured to the customer's drawings, including the mounting areas and interfaces required for final assembly.

Real-World Off-Road Applications

Designed for roof-mounted storage on off-road vehicles, this custom plastic roof box provides space for recovery gear, camping equipment and other outdoor supplies.

For products used in demanding outdoor environments, the molded body is only one part of the overall development process. Sealing, load capacity and long-term durability need to be validated at the finished-product level by the customer's engineering team.

Jinsumei's manufacturing responsibility is to produce the molded body and finished units according to the approved drawings and agreed specifications.

Industries We Support

This project demonstrates how rotational molding can be used for large plastic components across several industries:

  • Off-road equipment brands — storage boxes and vehicle components.
  • Overlanding brands — vehicle-mounted storage and adventure equipment.
  • Automotive aftermarket brands — custom exterior plastic parts made to drawings.
  • Outdoor equipment manufacturers — molded housings, tanks and enclosures.

Custom OEM Plastic Manufacturing

Developing a similar product? Jinsumei reviews OEM rotational molding projects based on customer drawings, existing samples or preliminary product requirements.

Our team evaluates the part geometry and manufacturing feasibility from a rotational molding perspective before tooling decisions are made. Depending on the project scope, support can extend from mold development and trial molding to repeat production.

Jinsumei works with OEM customers across the US, Europe and Australia, manufacturing fuel tanks, water tanks, equipment housings and other large hollow plastic components. As a custom rotomolding manufacturer, the plant is set up for large hollow parts of this size and shape.

Learn more about Jinsumei's manufacturing background.

Looking for a Custom Rotomolding Manufacturer?

Have a product drawing, sample or new project in development?

Jinsumei works with OEM customers to review manufacturing feasibility and produce custom hollow plastic components for off-road equipment, automotive accessories and outdoor products.

Discuss Your Project

rotomolded roof box manufacturer,custom plastic roof box